Viewing all customer Discussions for:

Door & Window

I have two broken block and tackle balance from non tilt windows. One has 2630 GM stamped on it and the other has 2640 EX stamped on it. I need help in determining which replacement parts these correspond to.

No names numbers or markings on parts. I believe they are from Sellmore industries...

I have TRUTH Entry Guard casement window operators. The part in question is stamped L30841. FROM THE INSIDE, the crank is on the lower Right. When turned, the window opes with the Left edge moving outward. I need a few new operators, but I want to start with just this one for now as I have no ex ... (cont.)

Length of metal piece is 26 13/16 inches not including plastics pieces. One plastic piece is 1 5/16 not counting those 2 little pieces in metal track: and other is 3/4 inches not counting the curvy piece under the track its marked 26 3 CP CALDWELL help me figure out what to order. Thanks ... (cont.)

these are for the same Milgard door . The roller with sizes on the paper and lock. I have look at locks on different sites. The is the other side of a double silding door which places pins in the top ane bpttom. But no jaws come out to attach to other door. Scotty

Stamped 20.2 lenght 20 and 5/8 in by 1/2 in by 5/8 in(depth)

The pivot shoe measures 2-1/6 H x 1-1/4 W x 9/16 D I have 4 windows with broken pivot shoes so I need to order 8 shoes but not exactly sure which of your assortment will match. Appreciate your help.

33in lenght 0.5in by 5/8in 30.20 stamped

What do the letters next to the numbers mean? example: 21D example: 21C How do figure out the weight off letters?

I need the shoe thst fit spring with end like a T

I'm looking to replace our sliding door lock if possible.

Appear to be Milgard crank handle. tip folds. for casement windows. No names or numbers on these parts, but other parts on other windows say Milward.

Trying to replace the spring loaded hardware on my windows. The pictures show the parts I need to repair another window. I also need to replace the clips holding the mechanism in place The bottom sash weighs 12 lbs.

I see that you have plain and ribbed, but as you'll see in the photos, I have a channel balance with an indentation at the bottom. It is like this with all of them. I have tilt windows. I'm attaching some pictures of what I have that I hope will help this make sense. Do you carry the types o ... (cont.)

replacement pivots for Lowen brand tilt sash windows. Purchased circa 2002 The channel balances seem to be exactly like the S751 series with the 15-014 shoes. Do you have similar/same parts? Could not find anthing similar on your website. The closest I could see was 26-150.

Hi, I'm looking to replace the coil balances, pivot lock shoes and pivot bars on a window. It's a double hung, vinyl, champion window. The panes are both 49" wide x 35" tall. as best as I can tell, the channels that the balances are in are 1.25" wide x .5 deep thanks!

window operator needed for casement awning window

Had plastic cover that goes over the coil break and I'm looking for what possible part numbers or what type of parts will work for replacements. Thank you

Measures 2" tall 2" long and 5/8" wide wheel is steel and approx 1-3/4"

HELLO, WE NEED QTY OF 4 LIMITERS AND QTY OF 2 CASEMENT HINGES PLEASE. THANK YOU,