Viewing all customer Discussions for:

Door & Window

Windiw latch

Hello, I need help identifying the correct window lock size for my window. The top window is fixed in place and the bottom window moves up and down. I have attached photos of the broken lock with measurements alongside the latch. Thank you for your help.

Hi there, I'm looking to replace some sash guides for other windows. I've attached a few images along with measurements (in millimeters—for the sake of accuracy). Could you please help me identify the correct part so I can order it from your website? Thanks so much—I appreciate your assi ... (cont.)

The wheel is metal and the adjustmens screw goes on the top. I tried a home depot barton Kramer 457 it would work but it is .85" and the bottom of the door opening is .76" could mill it down but would rather have a direct replacement

Vinyl windows

I need to order from you and replace 2 operators on my steel windows from 1950s; one right side and one left side. I suppose they are 9 inch window operators which are shown on your website under Product Code 39-001 and 39-002, but I’m not sure. Please identify them using photos I uploaded. Al ... (cont.)

Trying to find something similar to this one. If you look close it has a 4 on one side and a 5 on the other.. We would definitely buy 2 if we figure out the correct one.

i need to replace lock and keepers the windows are silver line windows

Can you identify this screen door handset and lock? The only marking I can find is a star stamped above the keylock.

I need a replacement snap in glazing strip for a white Pella window.

I have 10 windows that uses the roller part that I supplied the pic for. Each window has four. advise if you need additional pics of the other sides of the roller. All sides are different. Thanks!

Hi Swisco Team - I have a coil balance, single sash window. The coil is disconnected/broken on one side and the shoe is broken on the other. I *think* I've narrowed down the spring to a Series 160, 6.5lbs, and a 17/32" 15-199 shoe. I'm lost on the top plastic block part.

I need to buy two new rollers for my window. It doesn't have the roller now and is super hard to open. Here is a picture of a roller from another window in the house. My house was built is 1989

Hi need some help finding a compatible pivot bar. I attached a picture of what I need as well as the window for reference. I belive it is a Simonton window. Thanks

Two on bottom of each horizonal sliding window

We attempted to order moulding for the outside of our Larson screen door, but unfortunately the part we got was too narrow. We need a 5/8" moulding and when speaking to Deb, from SWISCO, she said there was no part available matching that size. She advised us to contact "Part Identifier." I've tri ... (cont.)

2 per window at 9 windows equals 18

Hello I am in need of two block and tackle track assembly parts. Basically everything that you see in these photos. It looks like the number on the side of the track is 16 C which I'm assuming is 16 inches of metal track. hope you can help me with this. Thanks. Kory

I have a Jeld Wen window and discovered that I'm missing this piece on the right side of the window. I have a double hung window and this piece is for the window on the inside bottom. I believe I have all the piecces above the blue plastic part.

message