Viewing all customer Discussions for:

Door & Window

Hi - I had trouble opening/removing a window and discovered the shoe on both the left and right coil spring was damaged. I looked at your website and think the series 140 Quick tilt is the part I need. Just looking to confirm. I only removed the left coil assembly Not pictured the coil is stam ... (cont.)

I'd like to replace this 'dummy' type handle set with one that will work with the operable locking latch feature of the hardware mortises into the door. The locking hook type latch has a square opening for a locking lever and swings down from the top. i don't have photos of the handle set removed at ... (cont.)

Hello! We have an old Alumco Aluminite 1550 series screendoor that has a latch, but is missing the strike plate. I wasn't able to find what might fit. Are you able to help? Thank you!

Looking to see if you can identify this part that is attached to the bottom of the window that goes into the balance clips

Only markings are 26 3. This one in particular is 26 inches but searching 26 3 doesnt give any valuable info on the correct series needed

Hello Swisco: I am in need of channel balancers for my Pella windows. The metal length is 28 inches. kill

I am looking for the internal parts to the lever handle and cover. I purchased the lever handle and cover and then realized it is the internal parts that need replacement. Hopefully, this is available for purchase. Thank you

I'll need to buy four 2040s, two 2030s, and four 2340s. Top and bottom inserts are identical (or at least look identical) on all of them. Top insert has wings but bottom doesn't. Thank you!

33" 32 5 ax cmc 1

Looking for these peachtree glazing beads for casement sashes Roughly 13/16" wide x 9/16" x 1/2" Tan in color

Need a replacement. Don't have any part numbers.

This is a customers photo and I apologize for the lousy picture.....I have not had a chance to investigate any further for info at this time. You have helped in the past with other window tilt latchesThank You,Ray

I am confident I have the S795-28: 28" Series 795 Channel Balance. They are stamped 28C. My question is mine have a hook at the top. Can you provide a recommendation to replace mine? I am also not sure if the included shoe from your 28C listing is the same as mine.

I have added picutes of the part that we need as well as the sticker currently on the windows. Would you be able to supply the missing part?

size is 34B. I'm assuming S795 channel balance is the correct one but not sure. If so, can I replace the top screw clip with a hook...as my windows have a top hole for use with a hook on the top.?

I have a bracket that is broken. Do you carry a similar product? thank you

Good Morning, I am in need for 4 sets of these plastic guides Thank you.

This is a plastic casing for operator with the letters GU I only see 39-188 but my bar is 5 3/8 long . Will it still work. I know I'll have to drill new holes into frame to secure

Hi there! I cannot find any manufaturer name

How do you remove old nonfunctional night locks without damaging the window frame? Attached is a pic of the existing lock slightly deformed from attempts to remove. Also a pic of the part I bought from you to replace the original one. Others of these have tended to be self-removing and installatio ... (cont.)