Viewing all customer Discussions for:

Door & Window

Is 81-156 the correct part number can you send dimensions for verification. You can also call me to discuss.Thank youJohn

Pat.No 198202 US this is the only number on it. In case you cna't read the numbers written on the paper in the pictures the height is 5 1/4 distance between screws on bottom: 1 1/8 ctr to ctr arm bar is flat and ctr to ctr is 2 1/2

Please see attached to help identify snap-in glazing part

Can anyone help me identify the glazing strip that I needed from this picture? It is made of plastic. It is badly warped and popping off on the south side of the building. But intact and staying in place on all other sides.

I would greatly appreciate assistance in identifying the correct part and option for a Jordan non-tilt window. I am assuming that I need a pair of: 29" Series 351 Channel Balance option 2830based on the photos and the markings on the existing balance. 16-23 pounds sound about right for the window ... (cont.)

Hello, I have a broken channel balance I'm looking to find a replacement part for. The Series 380 seems to be the right product but I have a couple of questions before buying: 1. The one I have has a wheel in the shoe. The 380 part shows no wheel. Will this work without the wheel? 2. The one ... (cont.)

Looking for plastic screen door handle/latch (photo attached) also attached is door model information. The door was installed in 2012.

These are the pictures of worn weather stripping for a early 90's weathersheild sliding patio door. They appear to be vinyl and have compression wings on both sides of seal. They are approximately 5/8 to 3/4 inch thick and go between the sliders.

I have bought before parts for our windows. Do you recognize this part. It belongs to the same windows I have bought parts before.Looking forward to your helpSincerely Isaac T

I have a window balance where the aluminum shaft is 24 inches in height 5/8 inches in width the spring inside the shaft is 13 inches last the string is at the least 36 inches in length. The mechanism in the window shaft has no way of coming out so I guess that would need to be cut out. Let me know i ... (cont.)

Do you have this handle set?

I have three (two right and one left) broken tilt internal window latches.The "buttons" are broke off the 3 latches. We need help to identify the right parts. We took pictures of the buttons of a latch that is not broken, made a drawing of the broken right hand latch. Also have pictures of where t ... (cont.)

The metal part is 10" long. It bears the following numbers: 09 4 BSI 0E

This is a sample of the weather strip that is currently on my front door. It is not effective. Air blows through so much, especially with a North West wind, that I can see a billowing of blankets that nail over and around the entire front door. It is worse around the top portion of the door perhaps ... (cont.)

WHAT DO YOU HAVE FOR REPLACEMENT OF THIS STYLE...?.ANY COLOR WILL BE FINE? PLEASE ADVISE.

I need the outside storm door handle assymbly that matches the inside handle 40-150

The roller I was looking are with flare width. One of the top part is broken

Looking for a replacement balancer for 1960s era anderson double hung balancer. Has E28 9#27 7-85 stamped on it.

The roller image shows the patent numbers and that's all I can see anywhere. The offset appears to be 1/2". The rollers are 0.763 dia and 0.186" thickness and are plastic / nylon? The top roller attachment is all I really need as the imaged one had the roller fall off where the axle is swaged into ... (cont.)

Please help me identify which part to order. 22CP is the only thing stsmped on this part. Thank you