Viewing all customer Discussions for:

Door & Window

Hello! I am in need of a pair of pivot shoes for my window. I did not purchase the windows and have no history on what they are and there are no distinguishable markings on the windows. Best I can tell they are American Craftsman by Anderson from Home Depot. I THINK that I need the CertainTeed ... (cont.)

Do you have a repplacement for this operator that is available in gold or bronze?

I'm looking for this glzing bead in almond.

This balance has end tips that are plastic. I think they are called winged tips

Hello, I need enough coil balances for 7 windows. Each side seems to have two coils so I may need 28 (plus two extra) so 30 Coil Balances. plus any part you think I will need to complete the installation. The Coil balances say Omega 5.5 62" on them. The windows are single hung an approximately ... (cont.)

Old aluminum window, need guide on bottom. 1st picture is the broken one, third picture is what it looks like. Wayne

Hello I'm looking for roller, it's for a glass door, I need 2 pieces Can you help me please Best regards

I have two windows that are aprox 25 years old. The window crank housing has broken off of both. I have attached pictures of both. I need to replace both of them.

Looking for this top guide on a large mirrored sliding closet door. Sorry not a great pic

I'm trying to identify the needed white glazing. I've included two pictures of the current glazing, which is bowed and will not snap back into place. It appears that the vinyl glazing replaced original aluminum glazing. The aluminum glazing is at approximately a 45 degree angle and is 5/8" wide. ... (cont.)

Need to order replacements

I have two patio doors which are alike and need two sets of two rollers for a total of four rollers.

I have included three pictures of the glider parts we need. First picture shows the broken drawer glider. The second and third pictures show the glider that is not broken with a measuring tape so that you can see the size. Hope you can help us,! We would like to order a dozen for future repairs whe ... (cont.)

Need help finding a replacement part

Hi, I need help identify the part I need for my window both pins has been damaged at windows base. Need to get the replacement

I need to replace a balancer for a Milgard window (Installed in 2002). The part is marked 29 4 DV CMC 7 (see attached photo). I have also attached pictures of the two ends of the balancer and the length of it. The metal groove is 0.5 in and the length of the metal part is almost 30 inches. Not su ... (cont.)

Hi, have a couple of old double-hung (non-tilt) windows with channel balances that need replacing. The channel balance is marked with 22HD B.S.I. Sash weighs about 16lbs. The sashes are compression types. The channel balance measures 23.25in long x 9/16 wide x 9/16 deep. The liners do not have any t ... (cont.)

Hi I need some of these handles. The Windows are aluminum framed 10 or less years old.The hinges say truth hardware. The handles say anderburg I believe.The pic shows locked position.. when open the plastic piece folds up out of the way.Sorry no pic of front sideCan you help?Maury ... (cont.)

Looking to add a keyed lock to this old Andersen sliding door.

We placed a custom order with Tom in January. We need another pair. How do we get started? -Dawn, or Terri