Viewing all customer Discussions for:

Door & Window

Door rollers needed. Is this something you'd have?

We have Certainteed vinyl tilting replacement windows. We have several where the mechanism that releases the bottom window for tilting is broken. The tab that holds the window in place can easily sheered off by the stop at the top of the window if opened too far or too forcefully. We have one set of ... (cont.)

Looking for the locking mechanism and handle for the Doorwall in the attached pictures.

Hi, every window that opens in my Centex home that was built in 1999 needs parts. I need new springs to help open the windows and tabs to allow them to tilt open. I believe the springs are called cross bow balances. 2 x 23.5x27.53 x 27.5x2812 x 27.5x322 x 31.375x37.54 x 31.5x32ThanksKen ... (cont.)

I am trying to find a few of these glazing bead parts. It is about 3 feet long. Can you help??? I don't know if they make this exact one anymore...if not- which one would suffice?Thank you! Kristi

I had been in contact with you a couple weeks ago. I got busy so I am sorry for the delay in getting these pictures to you. This is a Truth item. The screws that hold it into the window are stripped. i need the main body part that has the screw holes. The one pictured is one of two. I have a ... (cont.)

I have a storm window that one of these plastic pieces on each side at the top of the window, it has a small screw that holds it in place. It keeps the window on track and lets it pivot. I can't find this part in our catalog.

There is a little emblem that says ?TRUTH? on the lower right hand side. That?s all I see.

I want to order a new balance for my windows. Measurements: width is around 34, and the height of the window is around 58, each sliding part being around 29 inches tall. One website told me to buy PEACHTREE ARIEL 25-1/4-4 CHANNEL BALANCE, 3660 NON-TILT WINDOW. I?m wondering if that is correct and if ... (cont.)

I need a replacement door knob for this patio door. And there?s no identification on the door except what is written on the hinges.

I saw some of your products are very close to what I am looking for but it seems that the arm that locks on to the window isn't 5 inches, it's more like 4.5 inches. Is the 5" just an estimation toi guys use or does it have to be exactly the same length? I'm looking at the 39-187 operator? Is that r ... (cont.)

Height 3? Width 1 1/4

Truth 2 7/8 pivoit arm right hand

Hello, I need a window balance replacement and I'm not sure which one I need. The Stamp on it says 21 12 BSI (see attached picture). It looks like it's 22" long and 1/2 thick. I have attached a few pictures that may help. Please let me know if you need any additional info.Thank you ... (cont.)

Only writing on unit is left there is a NAMI decal on door frame I think may be Millard as they are the only one with the mounting screw perpendicular to the handle that I have found but unable to match locking mechanism on internet or is another design needed? Any help appreciated. Thanks ... (cont.)

Hi, I have bought the 55-182 Grid Clips since my old ones have fallen apart. Quick question, how best to re-install the clips and grid? Clips in between the glass and plastic then push the grid onto the clip? Thanks Chris

The length is 24", channel width is 1/2". The window has the standard clip to separate the windo from channel

I am looking for a replacement for an Eagle awning window is as a number S-1081-62 on arm Do you carry this part? Thank you for your help on this. Best, Mark

Appears to be bottom part of balance spring that lower sash slots into

Hello, Looking for the parts necessary to repair this door handle