Viewing all customer Discussions for:

Door & Window

I am not able to remove the shoes without cutting the channel. I don't want to cut the channel until I can get an accepted estimate. Are you able to identify the spiral balancers and shoes by the pictures I attached? Are there covers I can buy to hide the area that I will have to cut in order to rem ... (cont.)

I believe I found the correct part just having trouble figuring out which color it is exactly. I think it has the number 15993 on the inside which could be a color/part number. Thinking bronze or clay? Also what is your return policy?

I need about 30 feet of dark green snap in glazing. Here are photos. Please help me identify so I can place my order . Thank you

Do you have any corners like these? I do not know what make of window it is but they corners have all broken. they have a flange on it. thank you

Hello, We are looking for the tilt latch in the picture. I have attached a ID sticker that was on the window.

Looking for a replacement floor track for a Stanley by-pass sliding glass closet door which is 6' in length. Style with 2 parallel tracks for rollers. See picture. Please email if you offer these and provide the method to place an order. Thank you , Peace, MikeThe replacement floor rail/track I nee ... (cont.)

I have 2 apartment buildings with TRACO replacement windows that are probably about 15 years old (I am a new owner. The spiral balance in EVERY double hung window has failed in the lower sashes and some in the upper sashes. My question to you is: Does this seem right? Should I be ordering stronger w ... (cont.)

I had a handyman come to my house to look at a window that wouldn't stay open and he told me I needed to order these parts for the window. I need 2 of each.

Do you carry these? Someone has broken the tabs off. Thanks for your help.

img-3834 is for single hung window bottom seal img-3835 is for the sliding vinyl door

Hello,I am contacting you in order to know if you send parts to Madrid (Spain).If so, I am attaching some photos of a window guide I would need to replace (in one of the pictures you can see the two guides together. The guide above is the correct one, and the guide below is the one to be replaced).C ... (cont.)

From 2011 Masco Quality brand cabinets.

I cannot find any markings on the part or the door for manufacturer

Please see the attached pictures of my broken handle and latch. I indicated the hole sizes and dimensions from edge of frame. Please advise if you can come up with a replacement or if you need more information, thank you.

I need to replace a broken glazing bead on my kitchen window, and would like to know which one to buy. It is 13/16 wide and 5/8 high. Thank you. George

I got an new igu installed for igu in a wood frame very sloppy.I am planning to redo it. I am in need of glazing bead to redo the glazing beads. Hope you can help to identify the best fit you have. any light color would be great. ( I was in product design and Manufacturing Eng field.)(4 photos)The ... (cont.)

The part of the operator that?s outside the house, exposed to the weather, and goes under the window pane is all rusted. The inside handle bar and the rotary mechanism is fine. Please suggest replacement parts / sub-assembly. Thanks!

Team: I am trying to get my wooden bedroom (can tilt forward)window to open and stay open. I cannot find any manufacturer information as I am in a condo that was built in 2007 and I don't have the ID of the developer. The side springs/balances need to be replaced in order to raise and keep the wi ... (cont.)

In my bay window (not openable one/stationary/picture), I notice the exterior rubber seal/glazing bead turned rigid and protruding out needing replacement. Please help me with.. - identifying the right glazing bead. -help me understand what is holding the sash in this window model, if I pull off ... (cont.)

I need to replace four 4 wheel pocket door carriers for two doors. Wheels are 7/8" wide spaced 2.75 apart and 1/2 inch from the base of the piece. What do you suggest i purchase to replace the broken and bent ones?