Viewing all customer Discussions for:

Door & Window

I have large windows with these balances, can you identify these parts and price them for me please? The balances are 34" long. Thanks for your help.

Metal part of the balance measured at 33 inches long marking on the balancer says 32 5 HX CMC 11

Weather stripping both straight and angled for bottoms sash

B.s.i. 2113

Attached are pictures of my current Jalousie Operator and the Swisco 39-346. As you can see, my current operator arm points downward and the Swisco 39-346 points upward. We cannot reverse the Swisco as the crank would lay on the right side of the operator and is obstructed by the window frame. Sug ... (cont.)

All of the bi-folds in our house (built in 1991) have the hinges shown in the attached photo. I cannot get the single bi-fold door in one bathroom to stay closed after replacing the bottom pivot bracket. I have adjusted the door position several times. I assume the bushings are worn out on the ... (cont.)

trying to find replacement balanceres for single hung tilt window code on part is 29 7 1180 cmc

This pivot bar measures 2 19/32 ? long and 9/32 wide, it came off a Simonson window and has a number 7 imprinted on it. Any help would be greatly appreciated.

Looking for 4 counter balances and window guides. 28 1/4 3 are my stamp codes I?m attaching pics the windows are GA windows the two styles of guides are also in the pics that I need

There appears to be a track that is on the edge of the window. The vinyl on the top is torn with the insulation showing. We need to replace the weather stripping. Any help would be appreciated

Only marking is on the channel- #1120, channel lenght is 11-9/16 in., depth is 5/8 in., width is 9/16 in., the 11-9/16 channel lenght is an odd one, not sure if 12 in., would work ? Will the S385-12 replace it? Thanks, Gregg

there are two weather strips in each window frame. the outside strip is a brown strip about a 1/2 inch wide and the inside strip is a white strip 1/2 inch wide with a leaf flap and another flap against the window stop. These are original windows in house that was built in 1986.

Hi!WE were in a storm that damaged our "Window Glazing Beads" on two windows. I believe you carry the parts for Carefree Windows (Internet Search shows me)!Our windows are Care Free Windows (Photo 1)The Glazing Bead is 7/8" wide according to Hardware Store guy! I am going to need 8 pieces, they se ... (cont.)

I am trying to replace the mirror track. However, I am not sure which mirror track this is. Can you take a look at the photos and let me know which mirror track this is? Thanks, Bill

Do you have replacement pivot pins for the broken ones that are represented in the attached picture. The longest pivot pin is what I ordered and it does not work. Thanks in advance.

Please identify this sash balance. I would need a quantity of 4. Unfortunately I don?t have ready access to the shoe. I took pictures. Let me know if that will work.

I need to replace the hardware on about 20 windows. House built 1967(ish). Awning windows. See photos These words are on the assembly "TRUTH US Patent 2,775,446 other US and Foreign Pat. Pend." Thanks for your help. Kudos to your very interactive website.

The pins are not long enough for my screens on my Peachtree windows and can easily fall out. Are there longer pins available?

I need two of the wheel rollers, also I the weather stripping for my glass door. It nails on. The measurements 1 1/2" by 78". Thanks Amy

I am looking for some help I need to replace channel balances could you look at the attached pictures and possible help me out thanks