Viewing all customer Discussions for:

Door & Window

I need the plastic 90 degree corners for a screen assembly for American Craftsmen windows.

New customer. Home is a manufactured home...maybe 20 years old. The Jeld Wen decal is on the sliding door. Windows have nothing that tells me manufacturer. I?m guessing manufacture of home use same company thru out for windows and doors but thats only guess. Anyway what does the guru of window / doo ... (cont.)

We recently purchased a new home in Angel Fire New Mexico. Several of the finger ?pulls? are broken. We also have no markings or info on the windows themselves. There is a silver tag from the AAMA. It states:Quality control and testing AAMA Certification Program, accredited by American National sta ... (cont.)

i ordered what I thought was the correct replacement latch and was wrong. Can you help me identify the correct latch? Length is 3 3/4"

Handle lockset that operates the latch assembly is stripped and handle just spins without unlatching.

its two separate pieces: the handle the house that goes on the window and the crank thingy comes through to connect the handle to Would love link to the products in that specific color. Isaac

We are looking for the door weather strip. See attached pictures. We recently purchase rollers 81-163 it?s approximately 5/8 wide by 2/8 depth .. and it?s rubberthis photo gives the profile and it shows the 2/8? height profile hope this helps

I have regency windows that open up and down.I measured the window being 35'' and 4/8 long from the inside of the house the slide bar that need replacing is the right side. I want to order 2 of them if possible the slide bar 35'' including the 2 shoes it looks like the shoes are 1'' inch.Can you hel ... (cont.)

Sliding door Need parts

I'm looking for replacement tilt latches for a window. Note that the latches in the picture have the ends broken off (hence the need to replace). The only markings on the window are from the glass manufacturer (Toronto Glass). The glass is dated 1999. I tracked the window supplier to E&W Windows ... (cont.)

Window balance for 25 year old Atrium wood windows

The sweep is breaking and needs to be replaced, but perhaps enitre drip rail needs to be replaced ? Can you help? Thank you!

The piece I need is the 1" x 2-1/3" plate. I believe the three that are bent are because no one ever cleaned the rubber seal around the casement window. So when you try to open them they stick very firmly and take a fare amount of pressure to open. I have three casement windows where the operator s ... (cont.)

1980's window (Andersen?) White vinyl,approx 3/4" wide,1/4"height, 43" long. Michael

I'm looking for a replacement liner like this or parts to fix these liners. Is it possible to get new pieces that attach to the sashes to allow these to function as intended? In most cases the plastic pieces have been broken so the springs are not longer attached to the sashes. There is no manufactu ... (cont.)

I need to replace these side hung balances off of a single hung Cascade window. Any help would be appreciated. Shannon Sharp

I have a commercial door that I have attached photos of parts I am need of. I currently have a left hand bottom pivot but need a right hand the same as photo below

Two years ago I ordered S380-30 : 30" Series 380 Channel Balance. They worked great.Now I ordered same product and they don't hold the window. Upon review I saw that newer ones have longer spring and it is "softer". Balances don't hold window up.Most windows are the same size. Weight and dimens ... (cont.)

Hello, The need to replace several broken pivot bars on my 15 year old Crystal tilt sash windows. I'm not able to get the broken pieces out of the shoe while in the jamb so I'm not sure if the shoes need to be replaced as well. I only have pictures of the broken off bar in the shoe and a few piece ... (cont.)

Need Corner Keys for screen door. The doors are Guardian. The frame appears to be 1/2 inch. The corner keys appear to be 7/8 inch in width.