Viewing all customer Discussions for:

Door & Window

D14. 7p 27 674 Anderson Narroline sash balance. Windows are approximately 40yrs old. Need replacement for both left and right sides.

What do I need to replace

here's another one for you - an old plantation house here on Maui. I'm looking for a replacement for this style of operator. I need a LH and RH one. Thanks

Looking for replacement balance shoes. Not sure if they are side specific but if they are need 1 right and 1 left. I believe the Window is a Anderson Sliverline Single hung window

Possible part No. 45393 US Patent 361490 55600082 Mfg: Truth Crank post 3/8" White crank handle

Hello After searching by patent number and measurements of my patio door, I finally found this website. I believe it is the same model as 82-005. My sliding door has the punch out to allow for adding the cylinder lock, but i'm not sure which of your cylinders will work with this model the 82-310 or ... (cont.)

This coil broke in two and there are no markings. Can you identify so we can order a pair? This coil did have a number 8 stamped on the coil where it would attach to the shoe.Thank youMike

I need the seal that runs from top to bottom that seals the sliding portion of the window to the stationary portion of the window it's approximately 6 feet tall about an inch wide.

My 5 windows are 20x41 with cranks at center bottom. The windows no longer open, unless sheer force is used, because of salt water damage. Is this the hardware I need? Thank you

These parts are broken and would like to see if you have them.

Lock is broke, Ineed a replacement

Hello!Having problems lately with door-wall closing rather poorly. Popped out the door & flipped it over to find roller/bearings with "Del Mar Roller Corp" stamped on the side. Hoping I can buy some replacements.I have a total of (4) needed.Thank you in advance!Mike

Do you have something like this?

I'm replacing the dual pane windows in my Apex windows and the vinyl glazing is falling apart as I remove it. It measures around 1/2 inches across. Attached are some photo's that may help identify it. Any help would be appreciated.

Park model slider lock set just pulled out of door with the key. What part do I need?

Hello can you help I would like the price and availability of a part labeled 1820 the aluminum channel is 18 and 3/16 inches in length I have attached several pictures of the ends. The channel is 1/2 inch wide. ThanksBill V.

Could 15-159 work for you?

Norco window- JEL-N-303- need replacement cover. Images attached of the crank with the cover and without to show its center placement. Dimensions of the cover are: 5 1/4" wide and 1 1/4" high and 1 5/16" thickThe replacement cranks/ covers need to be fold in because of the motorized blinds the cli ... (cont.)

Hello, Can you please help identify a suitable replacement for the latch in my photos? There is no visible description on this window. The overall dimensions of the latch body are 86.5 x 18.0 x 10.5mm.

No manufacturers label on windows. Windows are at least 18 years old. Only mark on latch is Pat No. 5,671,98.