Viewing all customer Discussions for:

Door & Window

This is pivot from a double hung window 2.75" long with a screw hole located 1-1/8" from small end. #5 stamped on pin. Do you offer this part?

these are pictures of the old balance and one of the new ones I have ordered from you (3800). I have successfully installed 4 (2 windows) however it was very tight. On the 3rd window, I cannot fit the window back into the sash with the new balance installed. when measuring the depth of the 2, the ol ... (cont.)

Some sliding/tilting windows in my coop apartment had their pivot shoes break, and I need to replace all 4. They are regular spring loaded, not spiral, from what I can tell. I can't quite decide between the 9/16" and 5/8": what I measured looks like the thickness is kind of in between. So I would l ... (cont.)

how do you get the windows open when the gear and handle are missing

I have no hardware... the window is closed - there doesn?t seem to be any Numbers on the part just says TRUTH

Looks like a spiral balance but I have no experience with these.

We have some pivot bars that have snapped off and need replaced. There are numbers on the ones that haven't snapped, either an 8 or a 1. The drilled hole is threaded. The whole bar is 7cm

Have 20 double hung Jeld-Wen windows #JW142JAN2008A#1 and about 5 with broken pivot locks as pictured. I'm sure after 10 years I'll probably have more. US Patent D467490, 4810108 and 6,679,000 markings.If you can ID, please let me know price and delivery on standard package size near 20 to 50 pi ... (cont.)

Cannel Balance metal length is 28" and the channel balance width is 1/2". The clips and cords broke. Please see attached pictures for what the hardware looks like. Would like to order any type of replacement that would work with consideration to quality and cost. Looking for best bang for the bu ... (cont.)

Not sure which one to order. My measurements areapproximate. Please advise.

inside track on a spring holds window up and where window is opened to it measures 1 inch wide and 2/1/4 inch long with a screw on rear to adjust window tension was bought from home depo some 20 years ago they don't know who made it or any manufacture marking on window or sash thank you Ed ... (cont.)

I'm looking to replace an Insul-Sash Tilt Latch Do you have a set that will work?

Sirs: A friend in France has Peachtree windows and needs the balance spring replacements. ( see attached photo). He says that the reference # is 35 5 G1 3S CMC and that the windows are marked G9941CAE.I'll be traveling to France in a week and if you have 6 pieces that will work, please let me know a ... (cont.)

Need to replace window channel balance. 2930 is 30" long metal to metal, 1/2" wide, shoe 1 1/16 of an inches side.1420 is 15" long metal to metal, 1/2" wide, shoe 1 1/16 of an inches side.2620 is 27" long metal to metal, 1/2" wide, shoe 1 1/16 of an inches side.

Like me, the aging joints on my Pan Am window require repair or replacement. I don't know the names, but I've attached photos with measurements. Pictured is the attachment on the left side (from outside looking in.) The right side is also broken, but the entire nylon piece is missing, Thanks for any ... (cont.)

Similar issue. I have a window slider and currently looking for replacement for the handles:

Hi, can you help me identify the correct replacement balance? Thanks

Used with 540 S190 Coil Balance

Hello, I am looking for this window part. It is from a vertical sliding window pane, circa 1991. The forked/square protrusion fits inside the frame itself. The hole accepts a screw that attaches the top part of the aluminum frame to the sides. The round protrusion serves as a guide to keep the windo ... (cont.)

Looks to me like a 25 inch, 5/8? red. Ready to order now