Viewing all customer Discussions for:

Door & Window

I need the Right jamb latch for my Caradco Wood Casement C-200 Series Censys Technologies Corporatio Thank you. Hague H

I am trying to locate the above corner key. The stamped number is 193. Thanks for your help Thanks, Paul

Vinyl bead goes on a clad double hung window . I don't know the manufacturer of the window.

The latch catch and replacement insulation strip for the Simonton casement window (I included picture of description tag as well)? Thank you.

Looking for this part; however only see 3 ft options. If you could point me in right direction for the part. My windows are between 47.5 and 72 inches. Do I just need to order multiple 3ft pieces and put together until I reach that height or width? thanks, Lang

Hi,I need a complete set for metal pull out door. The pics are for the door that has good working parts. The lower right side, looking at the back of the door had a screw head which broke on my door that needs parts. I can send better pics if you need them. I dont need hinges. Could you also send ... (cont.)

wanted to know if the handle set came with all three different lock latches. the picture shows 3 different sizes we need one that is 3/8" Can you also confirm it has the 3/8" size lock thank you

This roller is from a vinyl-framed sliding glass door that was custom made at a local window dealer that has since gone out of business. This roller appears to have a model number 30410 manufactured by the TRUTH company. It is 3/4" wide with a reverse mount and 1.25" diameter flat rollers. The do ... (cont.)

The mechanism for this crank casement window has failed and I'm looking for a replacement part. Thank you

Its a Caldwell 16f85 Carrier Assembly according to the website I found after getting the part number off the pivot shoe. I also need to replace the channel balance. Not sure on part number but one has 29C BSI PL on it and the other has 35B BSI PP on it. The strings broke on both channel balance f ... (cont.)

I?m looking to replace the hardware for my storm door. There was no key when I bought the house and recently the handles fell off. Length is a little over 7 in for the plate and 6.5 between screws, same both inside and out. The side plate is 7.5

window is tilt wash need the plastic part that the window balance bottom mounts to here are some numbers off the balance 1/2" wide, metal part is 33" long 32 3 ku cmc 6 homeowner gave me some numbers he had 302503225015 12708692-1

Metal channel is 29" long. Springs ate identical but ate set in different holes. The plastic ends are identical on the 2840 and on the 2820 channels. This channels are from a Jordan window installed in 1986.

Do you have this part?

Looking for the "t" or "u" shaped metal post at tree bottom of a window sash on which a double hung window pivots to tilt out. Have no manufacturer specs, but the one I'm looking for is shaped like a wide "t" and is held in the bottom rail with two screws. Is this a commonly available part and what ... (cont.)

Hi,I need to purchase some channel balances and parts. As you'll see in the photos, I have two different sizes, 20 2 BSI and 26 3 BSI. I will need some of both sizes. Please let me know which specific parts to order.

What kind of spiral rod should I use to replace the old ones? How do I remove the old ones? The old spiral rods are 7/16" in diameter and 22" long.

i have an older sunroom with jalousie windows. three of the cranks shown in the photo are not functioning and need replacement. if you have the parts that would be great. if you have a person you could recommend that would be even better. i live in New City, New york

I'm wanting to replace the balances on a older Built-Well Superior double sash single pane window. The window is 30.5 inches wide and 40 inches tall. What would you recommend using and where could I obtain them. See attached photos of the old balances and window opening. Thanks!

This is an Alside vinyl window that doesn?t stay up. It looks like the pivot bars snapped off. Both sides look the same. Not sure which part is needed. It is single hung. Thanks!