Viewing all customer Discussions for:

Door & Window

Looking for these stoppers i put in new balance rods can not find the plastic parts

These are 3 inches long. For vinyl double hung window lower sash. At bottom. It holds the window into the side sliding mechanism. Without it the window will not stay up and and when i tilt it to clean outside the wiindow comes completely out.

I have an Alenco 3 panel patio door. Each panel is 34x91. The lock mechanism is the standard one sold ta Lowe?s and Home Depot and it is a touch too small. The screws see to be about 6 5/8? apart. There is a bit of open space at the top of the opening in in the door and the hook, despite trying all ... (cont.)

The black part is spring loaded. I need a left side and a right side.

I have 2 vent stops that have broken on one of my windows. The installer said Armaclad is no longer in business, so he can't get replacements. I'm wondering if you have what I need. Thanks.

Hi - I'm looking for this part (pictures) that holds up my sash - windows less than 15 years old and either Kolbe or Andersen brand. Any and all help, comments are greatly appreciated. Dana

I need to replace the sliding door handle latch assembly. The hook does not extend out to catch. You help is greatly appreciated.

14 2 BSI TE? 15 inches long. 9/16 in wide. Looking to replace the entire part with plastic guards.

Can this door be changed from sliding open right to sliding open left, moving the fixed panel from the right side to the left?

I have a 15" window channel balance that the cord broke on. The first picture shows the only markings on the balance. They read 14-5 KM5 CMC 68.

Ok so now that I have the ROTO MULTI-POINT MORTISE LATCH LEVER, Where do I find the replacement washer, pin and lock washer?

I have a double-hung window from the late 1980s - it is a Narroline and the window lower right side etching says AW 88 /1. Upper window is approx. 23 7/8 inches high and approx. 28 1/2 inches wide. Bottom window is approx. 35 7/8 inches high and approx. 28 1/2 inches wide.

Our home was built in 1992 and the exterior hardware of our gliding three- panel door is broken and I?m not sure what part or parts I would need to fix it. Here is a pic of the broken hardware.

My sliding glass door (circa 1972) with Air-Lite handles needs replacement handles inside and out and mortise. Please see attached 11 pics. I will call you Tues May 29,2018. Thank You, Jean

I would like to identify this latch. The locking lever is broken so I probably need the mortise lock and handle with the locking lever. Can you help? On the mortise I see PD 0020. Thanks

I am looking for a replacement pin for the top of a Marvin window screen. This fixed pin goes between the aluminum trim around the outside of the window. Thanks.

Bands on both sides have broken. Need parts on both sides plus coil balances as well

I have an Andersen Perma-shirls 200 series narrowline double hung window manufactured 1962 to 2012. The windows were purchased circa 1994. The string broke on a unit when we were replacing a lower sash. How do I determine which part to purchase? John

Part number is 0996. Also has PSH on a few parts

I ordered shoe 15 129 to replace my broken shoes. The dimensions to fit the track were fine but the lock itself is different. The pin from the window has a wide shoulder in the center. As you can see from the picture. Do you have this shoe or a replacement pin? Thanks for helping. ... (cont.)