Viewing all customer Discussions for:

Door & Window

5 1/4 long The holes are not that far as the one you have is like 7/8 Is very old I need one that I can use and I need like 26 of these please help thanks

Please review my attached pictures and notice that the U-channel, the metallic cover for the balance (extension spring) is off-center. This condition actuates the locking mechanism partially - pushing the brake bars to the window frame - and thereby making it very difficult to move the window up or ... (cont.)

Just pulled a bad balance out of my son-in-law's window. Window is an Andersen narrowline cottage style. Balance is clearly labeled as L8/1227. BUT....according to your website, this numbered balance is used on the LEFT side looking from the EXTERIOR. This balance came out of the LEFT side looki ... (cont.)

I need some pines for screens for my window. These are spring loaded pines. If you have them I need a few and direction how to replace them. My name is David

I build my house in 1987 with Milgard windows the balancer I have has a C 11 stamped on it but they measure 12 inches I would like to order a set of them

need replacement hinge for 3/4 ventilation storm door....NOT THE "Z" BAR THAT HINGE SPRING LOADED PINS ASSEMBLE INTO. Hinge has two mounting holes to attach to actual storm door.

looks like a part S390 # stamp on part is (21 12 BSI) 1/2 in channel 22 in length 48 x 24 double glass window pretty good weight to it.

I'm looking for a replacement part for my window. Picture is attached. I don't know who made the windows, can anyone tell what replacement arm it is called.

I need a set of these. I have ordered a set before but the it?s very hard to open window. Those have a number 2650 on them.

I need to purchase a pair of these rollers. do you sell them

I thought I was all set to buy an operator from you, but I see that the arm length on center on my unit is 2-1/2". The best I can tell, all your lengths are shorter. I measured from center hole to center of rivet.

I have a tilt latch that I need to replace for both the left and right sides. I believe this be be an Alenco window based on a label I found on another identical window. The are builder installed vinyl double-hung windows from 2005.Please let me know if you can help identify a replacement part.Mea ... (cont.)

This lock is for a bronze double-glazed window. Markings on the windows are as follows: ?Dual Glazed MIP-1895 ?Warrenty Information 14159901.1 ?AAMA Certification Program MFR CODE MTL-4 Series 165/3000SH H-R35-52x72 ?Could not determine brand Thank you for your help. (Me.) H. P. (?Penny?) Whitesi ... (cont.)

Just spoke to Steve and would like to replace a window operator with a compact or foldable handle. Would you advise the model number & cost? Color of choice is bronze. Thanks, Martha

I am trying to find replacement weather stripping for Capitol sliding windows. I have enclosed photos. Any suggestions would be greatly appreciated. Also instructions on how to remove /replace existing weather stripping. Thank you!

I have a Bilt Well window with a broken lock latch. It has a code of R3 on it. Can you help? Thanks

Good Morning: I need to replace the lockset on my Larson Storm Door. (I may try to clean and refinish it first, but I?m not too hopeful.) Larson says the replacement is their part number 202394. The door is from about 1995, and the part doesn?t show up on their regular website ? they sen ... (cont.)

Hello: Please see attached photos for the dual-arm crank I have on my windows. I need to replace two of these cranks, but based on your video, I see your cranks screw into the window frame from the top, while mine screw into the window from the front. The window frame is metal, so attaching ... (cont.)

Do you offer a replace for a Truth 29-120-2 roto gear awning window operator? Thanks for your help

Here are the two pics of the window operators. Please let me know if you can find a replacement. Thank you.