Viewing all customer Discussions for:

Door & Window

Hi, I need to replace some window glazing bead from a 1997 Cavco manufactured home. Some pictures, including one with the dimensions are attached. If needed, I can also mail in a piece. Thanks in advance! Patricia Matusiak, manager for Sunrise Vista, LLC

I need to see if there are replacement parts for my 24-year-old Vetter casement windows. The gear is stripped and the window won't close for the left window. Right window is also in need of help - the arm has disconnected from under the actual window. So I can't open or close it. Photo ... (cont.)

I have old 1998 Champion windows and the exist glazing bead is brittle and cracking. I am looking for a the replacement bead that matches the photo submitted. Both sides are approx. 1/2 inch in length with the glass slide being slightly curved. Can you recommend a replace bread for these windows? ... (cont.)

I watched your Youtube video, and visit your web page, they are very explicit thank you. I still have a problem because apparently my windows are too old. I identified the balance length and width. The reference in my balance says 2930. I also identified the shoe, but non of your samples show the ... (cont.)

I'm trying to add photos of the latch that broke off of my aluminum window, but nothing happens when I click on the "add photos" button.

Hi. Have a storm door that needs a new bolt. The bolt broke in half and fell out of the lock entirely. There is no bolt to slide. The registration number is CA493872. Door has a lot of issues but can?t replace at present. Only way to get air is to leave storm door unlocked which is scary dange ... (cont.)

I need to replace pivot shoe and coil balance for my tilt window. Window weighs 17lbs

Please help, I need help finding the right screen spring. Which part number is the closest to the picture?

I got Pozzi casement window I need a gear crank right handle if window is close it oppeen to right side You have part and how much and what is a part no Thanks

Any idea if this is something you have? It's around 2'' long - this one is broke, obviously. We just know it came from a Care Free window. Thank you! Carla

Does the Pella logo pry off to reach the screw head? Screw off? Break off with a sledge hammer?

Hi- I ordered the 39-114L's. Please confirm they are the correct handle. Thanx!!!

I was wondering if you had any SINGLE HOLE ALIGNER but without the hole? Also I need to see if you have this style of sash stop? And my Pivot Lock Shoes is 9/16 Deep 2 in tall and 1 1/4 wide just seeing what one you would recommend. Thanks

I have balances that say 18-19" and a stamp on one that says 1840. Do you have these and what in the order info I would need?

I am looking for replacement clips for 5109647 and your suggested 55-176 looks L shaped and mine is more plat. Am sending pictures and would appreciate your help. Laura

Dear Sir or Ma'am, the pictures above are of my Jordan window top sash guide (on right) and the guide I bought from you (18-166 5/8, on left). I need 8 of the guides, like mine, that will work on the balances. Please help me with this issue.Thanks,

HELP! I need 4 window balances. 32 inches long and 1/2 inch wide. I think the part number is either S380 or S385 but I can't tell the difference.

Looking for hardware that is polished chrome or brushed nickel. The door is metal and is 1 1/2 inch thick. Do you have a replacement that would work? Thanks for your time and help.

We need to replace the plastic part of the latch on a Pella self closing screen door for a glass sliding patio door. I am not able to locate the door itself on any Pella sites.

Need two