Viewing all customer Discussions for:

Door & Window

i believe that they are mirage windows these two parts allow the window to pull down to wash sorry for the last two parts i am not home so i dont have a pix of the parts installed denise

I have 3 sliding glass doors that need the rollers replaced. The doors are aluminum and I believe to be original to the home which was built in 1970. The only markings on the roller says DEL MAR ENG. LONG BEACH CAL. PAT. PEND.

approx 2" from open channel to screen

I can open the casement window, however cannot close it. It appears the crank is chipped or broken which is probably the reason I cannot close the window.

I am lookin to replace my springs and hardwars. Can u tello me the part number replacment Thanx

it pushes the spring down

Window operator for Pella 1630CC2

We have Simonton Windows and need several pivot shoes. Ours look like the certain feed pivot shoes # 15-192 Ours also have the pivot bars like the certain feed #26-175. Will these fit our windows??Measured our broken window pivot show and the measurements are the same as the 15-192 . Thanks for you ... (cont.)

I need to replace the guides in my windows can you help ID them?

Do you have these parts

LOEWEN DOULBLE HUNG. ABOUT 20 TO 25 YEARS OLD .There is a left and a right. photo is left

Latch inside door is loose It locks but I would like to get replacement latch Please identify Thanks Renee

I need 2 channel balancers 1/2" with 19-037 tops and 15-005 shoes. There are no markings on the windows to tell me the manufacturer. The balancers are stamped with 2920. Windows are approx. 35 yrs old. single hung non tilt. The channel that the balancer slides in is about 1 1/4" wide ... (cont.)

Our beach house was built in 1963. The windows are heavy metal lockmaster. Right and left window cranks. I need both and about 5 for each side. Wondering if your cranks will work?

Hello I need to buy a replacement balance for an MI window- it's single hung. About 60" tall overall. I've attached photos of both the good side and the broken side. It's a 3500 series and the serial # is 121031376.1 Chris

JELD WEN DROP DOWN WINDOW (TILT DOWN) IT IS WHITE PLASTIC 1and 7/8 inches long by 7/8 inches wide. it has two prongs on the bottom that into top slot of window. there is one clip on each side that you press in at the same time to release window to tilt out. windows are jeld wen 1995 year. ... (cont.)

Hello, It looks like our window needs a replacement spring kit. The first two pictures are the brand of the window; I called Haddonfield Lumber and they recommended me to you. The window dimensions are 32X54. The window automatically falls when opened (we keep it locked to keep shut) because the pi ... (cont.)

Can you give me part number

I ordered the 39-025 but I'm unable to remove the quarter inch size sticking out of the arm. Please see picture.

There are no numbers or lettering on it.