Viewing all customer Discussions for:

Door & Window

(4) pieces 36" long that go between window and frame. (4) pieces 72" long that glaze the windows.

Ppg Herculite K CGSB12GP1 16CFR1201 ANSI Z -97.1-1984 SGCG - 250 6023498 This is the info I could get off the door.

I need your help finding a spring roller catch similar to the pictures I've uploaded. There is a 1/4" drop from the under mount point to the top of the rollers. To give you an idea of the overall size, the mounting slots for the screws are 1 5/16" on center. The depth from the back edge of the ca ... (cont.)

I have the same situation. In need of the very same thing, tilt latches, vent locks and sash locks.

Need 3 hand cranks (white ) opo6-1520 By Roto ?

I need to buy the replacement spline for this door so I can replace the screen

After speaking to customer service representative this morning, I am sending a picture of my window crank. It is very much like your part 39-028 however the measurement from the middle of the "gear box" to the end of the arm is 11 inches. Everything else seems to be identical. The part# on my hardwa ... (cont.)

Hello, I have double hung wood window. Plastic Piece (foot?) that connects window to sash balancer spring has broken. Looking for options/path to easiest repair. Photos of (intact) piece attached as well as vinyl jamb that sash balancer spring resides in. No idea on window manufacturer, but house ... (cont.)

PLEASE IDENTIFY THESE PARTS. THERE IS A 2014 STAMPED IN EACH PIECE. THERE IS A SMALL SCREW THAT HOLDS THE KEY IN PLACE.

Hello I am trying to order a replacement operator for a Semco casement window

This balance is from a jeld-wen window. The only number I can find on the balance is 5737877 (?) I took a photo of it. The only number I can find on the window is JW-14 8/29/00 B#1. As you can see in the photo the balance measures 28 1/2 inches long. I appreciate your help with this as I have been ... (cont.)

I need to replace the hardware on my storm door the only markings are PSH Let me know what other information you need Thank you

Your picture doesn't show the inside dimensions of the leg of the corner going in to the frame.The one I am looking to replace has the flange at appx. 17/32 with the inside at 3/8.

Hi guys, these are the widows in question ..the channel balances .. The rods are ½ in width & about 18 inches long, with a spring inside.. I cleaned the window & both C.B. were ok so siliconed them and replaced ... The only thing was missing I think was the thing that stops them from wobbl ... (cont.)

Helping one of my clients. They have 96' thin metal bi-folds and for one of the doors the bottom slider pin assembly is missing. I saw some similar parts listed, but they are not the same. Hope you can be of assistance, thank you in advance, Robert Lijs, EXIT Realty Metro.

Need Replacement? These spin ok with no weight on them, but I would like To replace them since they are out. Del ENG Co, long beach California.

Dear Swisco: The crank handle on my garden window has stripped out of the housing and won't function any longer. I want to replace the whole unit, however, I have been unable to find the make/model number of the window/crank and where the screws are to remove it. I have attached 3 photos to s ... (cont.)

Hi , I am in need of top sash guides for 21 windows . I believe these are all same for left and right side of the sash . I will need to 42 pieces . The top part is on picture 1 . Let me know if you can help identify theses and if yes , I would like to get them ordered asap . Thank you ... (cont.)

We need to replace these parts on both sides of window. Our windows are MI 3500 series, sash is 34? wide and 29 1/4? height. Can you help identify these replacement parts?

I need two balances stamped 14 2