Viewing all customer Discussions for:

Door & Window

Hello, Here are the pictures. 1. I need to replace the balance track. 20" tall, and the header and foot as shown. The balance shows 2140.I know we have integral with header and foot, please tell me the part number separately. (balance, header, shoe in case in the future use) 2. I need to buy some ... (cont.)

I have some windows with broken latches and unable to find replacements. One is Krestmark and the other looks like the number 13?

I have a broken balances need to replace I just need more help to make sure to pick the right one

I'm looking to replace the balance springs in some of my windows. I've attached pictures to help identify the balance springs.

I pulled these top and bottom guides off my 35'', 3440 channel balances. My intention is to replace the whole assembly. It appears the closest options are the 19-002 top guide and 15-003 bottom. With that said, and being that I'm replacing the whole channel balance, is it reasonable to order the ... (cont.)

Need rollers and track

Pivot bar 26-450 most closely matches dimensions of the pivot bars in my existing windows. Will the 26-450 pivot bar work with the 795-32C balance? I am using the 795 series because the 850 series is not available in the 32.5 inch size.

I just placed an orderI apologize for the inconvenience but did not realized that they were other similar wheels., since I was using a small tablet. Our wheels are 1 1/2 inch in diameter, so not sure if the ones I've ordered are correct since they are 1 1/4 " instead. Would you please be kind to che ... (cont.)

I am looking for replacing the bottom rollers for my patio screen door. The design is like the one with your part 84-050N but on a smaller scale, the opening is less than 1/2 inch; almost 1/4 inch.

tilt in window parts. broken need replacements

We need to replace plastic inserts on sliding door

Do you have a replacement for this window screen retaining clip? I don't know who manufactured the Windows, but they were made in 2000.

I need hinges and locks for 6 awning windows. The part that attaches to the frame is 12" and the part that attaches to the window is about 24". These windows are 40" x 60" wood aluminum clad. These hinges allow the window to open past horizontal, although that is not completely necessary. I woul ... (cont.)

We are in need of a replacement window lock but don?t know the window brand. Would you be able to help us find a replacement. Looks like it has an angled keeper.

I?m pretty sure I need two 20? 385 balances but want to make sure that?s correct. Window weight is about 25 1/2 lbs. Balance pic is below with #?s. As soon as confirm, I?ll place an order. Thank you much, Randy

I have two windows needing replacement parts. The first one measures approx 29" long (metal to metal end) and has the following imprints: 28 1/4 3 B J and i would need one pair The second window sash balance has the imprint 22 1/4 2 L1 and it measures 23 1/4" long from metal end to metal end. ... (cont.)

Found this part, obviously broken, in our tilt window. Not sure what it's called but there's a spring on one end and solid metal rod on the end, surrounded by a plastic tube (partially broken). I hope you can help us identify and replace!!! Kathy

There are no descriptions on the counterbalance. I submitted a description to you Ref No. 7527760 on 5/12/2018; 1:55 pm. The counterbalance is 32" long. Is the cord and "Pin" (at end of cord) part of the whole counterbalance assembly you provide? That certainly would make replacement easier. ... (cont.)

Do you carry this part

Marked: 31 9 JV CMC 0