Viewing all customer Discussions for:

Door & Window

Looking to replace stripped hardware on custom window

We cant find this part. We have the 2 bar slider, and the cranks but this is the most corroded and we cant find and need several top and bottoms for a window that opens to the right when facing it on the inside. It will go with 39-253LB

Need this part x2

Hi, Can you please provide part number for the attached photo. The locking mechanism for window slash. it is a tilt window. It is broken. I need hala a dozen. Thanks

My double hung window will not stay open on its own. Using your helpful videos, I was able to determine that my coil balance unit was broken (see the plastic at the bottom of the unit).What parts and pieces do I need to replace the unit on both sides of the window frame? Based on your videos, I thin ... (cont.)

Looks like these are just push in replacements.

Need a new lock for handle and the lock part both pieces r in picture

I recently purchased some 390 balances, and before putting them in I inspected the window and saw the top sash on one end was broken so I need a replacement. Any idea what top sash this is based off the photos?

Hi, any help on trying to find operator amrs? Older Etling window. Thanks so much Jesse

Coil balance and shoes replacement. The coils do not latch in place on the shoe

We re hoping you can find these for us-

The metal length of one is 33 3/4 The other one is 30 3/4 I need 4 of each size. I have 4 windows to be fixed. All of them are that model with a little wheel on the bottom part.

I need to order 3 sets of balances for a customer and want to be sure I am ordering the correct ones. Here is the information I have; 1/2" wide, no wings and 1 1/8" shoes. I need 1 set of each 1730, 2320 and 2330

Looking for replacement sill mounted crank replacement. This one was damaged and now shaft doesn't intersect with gear. Sam is true in opposite window so I will need one of each "hand." Any help is appreciated!

?

Where can I buy these for a 35 3/8x51174.2300- 121544794*1+20*1. 2.33 7/16:25 1/803/06 SS LowE 3'Apaanl

Hello! This measures 4 1/2" across and no longer cranks shut. Seems similar to the Anderson 4-1/2", but hoping for your help! Thank you!

There is a number on the arm itself at the end 108. on the bottom of the crank assembly mounting is a number 71912 as shown in the picture

Looking for a few of these sash latches. These are Acadia window company windows, in Maryland

I have a client that has a missing latch on their metal entry door. There is glass panel that is hinged on one side and there is a "hook" welded to the other vertical frame. The client is missing the latch lock on the bottom so I'm trying to find a functional replacement.