Viewing all customer Discussions for:

Door & Window

I will need pivot bars for 2 windows and the rubbery sealant for 9 windows. Can you help find them please?Thank you, Sylvia

I need new Balance rods. My current is marked 24 3 KO CALDWELL. Difficulty deciding on which one is best match.

It's for a sliding door Measurements fastener to fastener 11" Measurement from end to end 11-3/4" Let me know what you recommend.

As you will see one end has broken off & the length of the pin is now about 1 1/8". Are these available & do you have a video on how to install it? Thank you. John

I have Weathershield slider windows on my lanai. I was servicing them when a joiner piece broke. I see something that's very close, but mine has different dimensions than what I found on Swisco.com. Do you have this one?

Do you sell either of these with the stainless composite roller! How fast can you ship them Thanks Fred

I have CertainTeed (BrynMawr II) windows that were installed about 15 years ago. Those in the more direct sunlight have shown deterioration to the non-vinyl parts. I want to replace some of the weather stripping. These picture are of what I think you call bubble seal weather stripping. Measuring it, ... (cont.)

Hello I could use some help with these parts. I could no longer see any identifying #'s on these windows. My apologies for the photos. These are the windows in a house I have overseas. I did get to measure that the spirals were 24". I will be going there this June and wanted to tackle this project a ... (cont.)

Looking for this part, nylon slide that the balaster goes in. It's 2'' high, 1 1/4'' wide, 1/2" thick. It's a jeldwin window older model, 7100 series. HR50 37x74

I am wanting a more durable replacement. This is the exact correct part but it "self destructs" after 5 years. See the attached picture. Before (new) and after (5 years old).

I have a problem with my Pivot Pin on the lower bottom sash I don't have a manufacturer but I do have the size and some pic. please let me know what you think.

I have been trying to replace the pivot bar (Product Code: 26-241) and now I do have more problem. The shoes is pretty old and it located all the way down so I am not able to put pivot bar into it. Since I already purchase the 30-40 pivot bar, is there any other shoes that I can use with there pivot ... (cont.)

awning style window

I have your 140 series coil and your hinge pins with the round head. the pin seems too large. please advise

It says "lift sash 2" before tilting?

Latch on the left is the original part. On the right is the replacement part one our our local hardware stores assured me was a standard size. The original has a depth of 1 1/4", the replacement 7/8". Alignment matches in all other respects.

my windows are replacement thermo guard series 405/455. please see that attached 4 photos of the pivot shoe that I need. it measures 1 3/4" height x 1 1/4" width x 5/8" thick.

Looking at your product number 30-011. I need the arms to be 3 inches and the internal arm to be appx 3 1/2 inch Does this meet these requirements. Thanks Sue

What is your recommendation for cutting the Milestone, white vinyl glazing bead. Product code 55-191-6. Thank you

My patio sliding glass doors are missing a few of these stamped 055-3.