Viewing all customer Discussions for:

Door & Window

Roller is approximate year of 1986 Mark is 83 over 14

Please help me find a replacement. The assembly is still functioning on one door and that what it looks like. The holes are where the new one would go. I don't have a lot of tools so I'm hoping to be able to get something that will be able to Install right into the old spot.

Hi, Total length is 8" long x 1 3/8" wide outside piece, from top to pivot stud that unlatches door is 2 1/8", screws are appx. 7/8" away from center pivot up & down, bottom lock is 2 1/8 from bottom to center of key hole lock, sticky label has The Forever View serial # A - 138 677, Thanks for y ... (cont.)

Hello - I'm looking to replace the hardware for my windows. The operator cover lists 7191B-33 underneath it. Am I able to use the folding handle with this? product code 39-301. what are my options? Thank you! Erica

Could you please help me identify which latch model I need? My Pella window is marked Clear Air IGMAC P 4-03. The hole to insert the latch into the screen frame is 1". If you require a photo of the entire piece, please let me know how to remove it (the remaining three are not sliding out easily). Th ... (cont.)

Hello. This is from a no-tilt window, circa 1998. the only identifying tag I can find on the window says "Milestone" series. The piece measures 29" (the metal part only). Can you help locate the appropriate replacement? Thanks.

Width just over 5/8 inch Top to hole center 3/8 Top to bottom 3/4 Top shelf thickness 1/8 Top shelf extension 4/8

Hello, I did not know that replacing my window balancers was an option. I just found your site and am really excited that this might be a possibility. I bought my house 6 years ago and there are 6 Alcoa windows that are just junk because the balancers are all shot?.some missing, some broken and all ... (cont.)

The problem with the 82-033 set is that the the lock on the original Arcadia doors in Eichlers is inside the sliding door itself, not on the handle of the door.

I submitted a pic of the broken one and it's corresponding piece. The corresponding piece is in tact. There's no sticker confirming it's a Jeldwen. It may also be a Millard.

I need a 12027 tiebar from Truth. It has 3 cones and is 50.9" I also need a 45224 clip guide. Can you guys find these parts?

I need to replace the rollers on my patio doors. My dimensions appear to be 11/16" wide with a 1 1/8" wheel. I see your 81-155 is the correct width but the wheel is 1 1/4" where as the 81-138 has a 1 1/8" wheel but the width is 3/4". Which one would you recommend?

Hi I wanted to convert my sliding glass door to be able to us a key from the outside. I don't know where to begin I believe I have a 82-080 model . Am I able to purchase the KEYED MORTISE STYLE HANDLE SET (82-081) and use that with the mortise that I already have?

have double hung Reynolds Windows American Classic . I need the part in the picture. It fits in the frame on both sides. It is a part that attaches to the window spiral tilt balance and allows the window pin to enter and connect to it. As you can see the round part where the pin enters is keyway li ... (cont.)

I have the following sliding double pane door: Viking Industries SGD-R15 Sun Valley-300 and I need rollers. I see you have R20 specied in the parts list but not R-20. Are they interchangeable? Thanks, Tony

I have rollyson top window sash guide 60-675BL. I understand the Black is no longer available and only the 60-675 in white is available. I wondered if it's possible to tell what window model I have as well as the balance model based on the sash guide number.

Hi, these are apparently broken and will not hold the window sash open. Please help me identify them. Thank you!

Hello! Trying to find a match for this door handle. Found your companys name etched into the corners of the glass. Please let me know. Thanks Chris

I don't see any manufacturer's name on the windows. I also don't see any stamping on the coils. The home was built by Ryan Homes. I would like to replace the coil balances in about five windows.

Hi, Want to be sure that I order the correct glazing. Aluminum frame, single pane glass. Looks like it could be your #55-006 Thanks -