Viewing all customer Discussions for:

Door & Window

TRACO WINDOW HANDLE IN BRONZE

looking for small metal clips that hold window mullions in place.

I am looking for the part that attaches to the end of a balance in what I believe to be a Crestline/Vetter double-hung window installed in 1977. I have heard it called a pivot clip but don?t know if that is the correct name. Thank you Ed

Hi, This is a double hung vinyl replacement window I need this part in the picture . Thank you Sandy

It appears that your part numbers 21-001, 21-007, and 21-154 could replace the parts in the attached photographs. I assume the guide pins would also fit the upper and lower door tracks. Could you please confirm all of this before I order? Thank you

my name is Homer I need to buy 4 window channel balance, is a 1/2 inch rail, 21" long, the balance top looks like your web side no. 19-005 , and the balance shoe is like 15-003 , I did talk to one of your representative, he asked to send with the pictures, here enclosed the pictures for you. My old ... (cont.)

I have two windows that have no balancers in them. These are pics of the ones that do have and are of same size. Thank you.

AS can be seen on the photo, there is a marking, "29 5 DW CMC 4". After searching your website, it appears that the S385-30-2950 might work. What do you think?

I am looking for a pivot bar like the following two pictures. The only identifier on the bar is the #4. Make of window unknown. The bar is rounded on one end. The other end has a small lip that comes out on either side of the bar. Can you help? Thanks! Bettina

Hi need to find replacement balancer for Windows on the balance is written 28c

I just googled P4600 window crank, New Zealand, and came to this posting from 2012. I am looking for these cranks in Ontario Canada. Can you tell me if there is a distributor of these crank handles in Ontario. Thank you

The bead,is 3/4 on one side 1 inch and eight on other snap in bead.

Looking for a upper sash vent stop in almond for a Pella ThermaStar double hung window. I believe it may be part no. V615345 or V784721.

I HAVE A CUSTOMER WITH A MILGARD SINGLE HUNG VINYL WINDOW THAT IS MISSING THE BALANCES AND I NEED TO FIND OUT WHAT SIZE TO ORDER. THE WINDOW IS 24" X 54". THE VENT PANEL MEASURES 21 5/8" X 26 1/8" PLEASE HELP THANKS DAN

Need replacement balances for 25 early 1980's Peachtree windows. Window label example: Ali-Class A, G4686 Type A, stamp on balance is 3672. Have other sizes as well. Stamp does not match example of those that show weight class. Can the G4686 numbers be used to map to proper balance, or do I remo ... (cont.)

Hello. We are trying to find balance rod replacements for several of our windows. The one in the photo is stamped with 2919, we need about 20 of these including the plastic sash cams. Do you have parts available? Some of the others we need are stamped with 3428. I believe we need 10 of these along ... (cont.)

Hi. Sierra Pacific which acquired Superseal suggested I contact you for this replacement part. I have 13-15 year old Superseal vinyl windows that I'm in process of replacing some of the glass as they have become defective. I've cracked several of the snap in molding? (glazing?) that resides on t ... (cont.)

set of each price & lead time

This is the part that got broken. Is part 82-107 what I need to fix my door? Thanks. Teofilo

Hello, Trying to find a snap in exterior glazing for some windows. I do not know manufacturer. Thickness is .02, but I presume thicker would work. -- Thanks Ken