Viewing all customer Discussions for:

Door & Window

pics coil spring balance

I need a 28 I the strongest listed is F. do you have any stronger?

I don?t know what to order

Please help me find a replacement for this broken item. It is a handle for a glass sliding door. Thanks, Keith

The part is .500L x .500W x .375H with a horizontal slot that is about half way through (.250). NOTE: the slot bottom profile is more complicated than "half way through" but would require a sketch to describe clearly. The slot is how the glide is held on the drawer track. The glide is captur ... (cont.)

These metal clips hold window screens that are installed from the inside. They're mounted on the wood window sill and the sides of the frame

I need to replace 4 channel balances for two standard pull up windows, Crown Window is the brand. Please help me order the correct replacement parts. They are 1/2 " x 25". The attached pictures have the markings on them as well. 23 4 GS CALDWELL 23 5 KQ CALDWELL 23 4 GS. CALDWELL 23 5 JR. ... (cont.)

Please assist- my windows want stay up. Because the coil in the first pic is broken- need to replace Also the thing that insert into the coil is broken on the bottom of the window. Can you help or direct me

33 Long, 1/2 wide

My sliding door roller looks just like Swisco's 81-093, except Your description says the dimples are 7/8" wide, but the description also says your dimple width is 1". Which one is it? Mine looks like it's 15/16" at the dimples.

The piece of metal that locks the door broke in two and I need to replace the handle. Pictures attached. I went to Lowes where I purchased the door and they said I would need to send the serial number of the door in to the manufacturer, Cole Sewell Registration number is 06289694673. Can you tel ... (cont.)

height 60 inches inside nontilt 3/4 × 2_1/4 window lock measurements 1_1/8 eries 1000 mst 4664 dh-r40 balance looks to be about 1/2 inch diameter 60 inch height

I am restoring some old (1946-7) single pane double hung windows, I am looking for jamb sliders, and more so the springs that go on the side, they have a spring and a flat twisted piece that goes into a tube that fits in the side of the sash of the window. can you help? the sashes have 6 lites each ... (cont.)

How do I replace a Take Out Clip? Bottom of clip is broken and I can't get it out at the top.

I'm trying to track down a guide that screws into the window across from a window channel balancer (2740).

Has the part number PM520A (part of a Atrium Sliding Glass Door locking mechanism)been replaced by something else. I am missing this part and I can?t seem to get the part number to come up anywhere! Can anyone help locate this part or part number please?

I have a chanell balance that I need to replace but it measures 23" (length of the metal) and there is not a stamp option like the ones described above, all I have on mine is a 2 DS 45L BSL. So my question is what Channel balance would I need. adain my to problems are: 1. Don't see a 23" metal len ... (cont.)

Greetings, my windows use the following Balance: 28" Series 770 Balance S770-28 We also have ordered the 15-184 Pivot Lock Shoe. It is no longer listed on your site. Can I use the PIVOT LOCK SHOE, 9/16" THICK Product Code: 15-179 for a replacement.

The pics are from a Simonton Dimension I single hung vinyl window. The metal coil is one-half inch wide and the white plastic piece above is one and a sixteenth wide, which is the main body and not the "ears". I need the parts for 4 windows.

The photo Above this sentence this is the right and left side of my window .. The right side somehow got twisted I think when I was putting the pane back in it slipped and I think that?s when It was twisted..... I do not know if you carry them like this or supply only small parts... The next pictu ... (cont.)