Viewing all customer Discussions for:

Door & Window

I have a cabin with 8 Row windows with rank out bottoms Some of the crank hardware are stripped when trying to open and close. is there any replacement hardware? Thank you Mike

I had my door broken and I would like a replacement. The handle has Canadian patent number 919213. The handle is 7 & 3/16 long x 1 & 7/8 wide. The holes are 3 & 15/16 centers. Thank you

I need both the upper and lower door pin assembly for the french door. The only name I could find was door fabrications out of Miami fla, but that was on the hinge, so not sure if it applies to the door.

2nd email on same subject -phenix

Hello! I live in a rental unit and have an old aluminum sliding patio door with a missing interior handle and lock. I did a little research and found out that I need a handle with an interior latch style lock and 3 15/16" hole spacing. The exterior handle cannot be removed for various reasons so I n ... (cont.)

The metal coil in this vinyl window has broken and the bottom slide is no longer attached to the fixed top part of the balance located in the slide. I'm looking for whatever parts I need to get this window back to functionality. Window came from Kendall windows in south jersey about ten years ago ... (cont.)

The window glazing is 1/2 inch by 1/2 inch. The little tab that slides under the window pane is 1/8 of an inch. The window tag states

Hi There, I would like to change this lock system to one that has a key. Could you please recommend which product would work and how to install it. Thank you for your time. Jolene

Hi, Need replacement handles (inside & out) for Cole Sewell reg # 11169594780. Attached are a few pictures, along with screw pass through dimensions. All white is preferred, but bronze/white works as well. Please let me know if more info is needed Thank you Jim

My DNS sliding door lock mechanism is broken. I am looking for the replacing part as shown in the picture. I need 2 of it because my 2 doors have the same problem.

My customer wants to order one pair of sash balances. These are round, approx.. 9/16

I received my S900-28 balances the other day. Thank you for the quick delivery. I am installing the parts and the ends do not match my original to fit in the tilt shoe. I have included a pic My window is a Better Built 4050 tilt insulated glass. Built in 2004 or 2005. I selected green tip. I ... (cont.)

Hi, I would like help identifying the correct channel balance. It is a 2630 bsi, 27

Old balance - think I know the balance but it is white so should i go with red? Sash about 15 lbs aluminum single hung from the 70's. MOre important Need the shoe and top guide. another email following with more pics.

This is an old window and the parts were thrown away when it came apart. The window outside measurement is 35w X 30h. Glass is 31.5 x 13, on the half in picture. It weighs 10 - 12lbs. I have no balancer parts to compare to since all the parts are missing. The width of the track is 3/4 and the depth ... (cont.)

Hello, I'm getting ready to place my order of two replacement channel balances. I don't know which stamp option to choose. The window is a 48 x 48 but the part that slides is 45x24 and its double pane glass. Thanks in advance!

Hello, I am trying to determine which key cylinder is needed for my patio door. I have attached pictures. I cannot locate identifying marks or the manufacturer's name or part number. The inside and outside of the door handle is 7 inches from the top to the bottom. The inside metal latch is 5.25 inch ... (cont.)

Can you help identify this glazing? overall width: 1 inch bottom width: 5/16th face width:3/4 inch

Cmech is only marking I can see. Please let me know what part(s) I need to order. Thank you.

Try to locate this truth awning type of mechanism and crank handle. Searched for numbers on the arm but could only locate patent number 3457675 and casting number 45002 underneath sill mount