Viewing all customer Discussions for:

Door & Window

It is similar to 39 - 194 left-handed crank I made a mistake that the wrong number please contact me

the only marking is the name Malta on the crank handle

I HAVE NO IDEA HOW TO READ THE STICKER ON WINDOW. BUT THE PIC IS THE PART NEEDED.

part says 265d bottom of window, latches window to raise and lower window

I

Hi: Does this handle have both push and turn functions to open the door? Thanks!

Hi. I am trying to find replacement balances for these. Could you help to identify the type and where I might find replacements. Thank you

too small needs to be a little wider in the gaps please refer to the photo for specification part number was 87-004 please let me know if there any additional recommendations

I am trying to find a replacement operator for an older weathershield casement.

Window balance for double hung window with different size for different windows. Thank you

Would replacing a broken 3340 with a 3350 be a better option? Or should I stick with the 3340?

The safety pop outs are broken on both sides of the window.

I have a PeachTree replacement window with an identifier number G3588 Type AE. Both balances are broken. The balances are stamped with the code 3634F and are 23 1/4" long. Do you know which part would allow me to replace these? If so, is that something you carry? Thank you in advance for your hel ... (cont.)

Metal anchor bolt is approximately 9/16" deep, 3/4 " wide and 7" long. It is screwed into the cutout at the bottom of the door. On the outside there is a lever that you push up to release the bolt from the hole under the door which allows the door to open (at the same time that the anchor bolt i ... (cont.)

This is a picture of the coil balance cover that I need. I looked at the covers that you have but I don't see any that have 2 holes for the screws and I need 2 holes. It's for a half inch dual coil. The dimensions of this plastic cover are 4 inches top to bottom and about 1 & 1/8 wide. Thanks for a ... (cont.)

Hi- Recently purchased a home and need replacements for some missing plastic window stoppers. Vents are about 1 inch tall and 1/5 of an inch wide.

I am a property manager in need of several parts for this type of window please get back with me so I can order parts or complete operating system for this type of window. The single straight arm is 11". It is face mounted like,39-141 but the screws go from the outside toward the inside of the hous ... (cont.)

Hi guys,trying to find this roller on a boat I take care of.on your site I found part 81-157 that looks to be a match but I need stainless with plastics wheels.or do you think 81-181 will work if I can adjust it enough to compensate for the larger wheels.im sure I could deal with stainless wheels if ... (cont.)

Looking for hardware identification and a reference number for the attached picture. It

Hi, I'm trying to find replacement channel balance for my windows. I took out the channel balance (pictures attached). The stamps on the two are not clear so looking for some help on what kind of channel balance I need: One says: 32 9 40 28" LT DT CALDWELL The other says: 32 5 JQ CALDWELL ... (cont.)