Viewing all customer Discussions for:

Door & Window

Caradco Friction Shoe 15-104 These were used in the windows in my home. Through the years the hook that connects to the spring broke on all my windows. I want to order replacements but was wondering if there is a better replacement part that will hold up better?

I Have a EMCO Forever View Storm Door with a Flat Screen Spline which measures 13/32" wide. I was wondering 2 things 1)that when replacing the screen, can the spline be saved and reused? 2) is the tool 75-019 used for that application? Please advise

Track is in terrible condition. Length needed is 5' 11 1/6" and two rollers like the one shown. The measurements are not perfect, but close. The door is double pane tempered glass and has sunk so low it has damaged the track and the rollers. Door pops off the track and jams. Can you help? Signed ... (cont.)

Can you please assist in getting new hardware ordered. 30637 is on the arm 30471 is on the rotto handle and base plate USPAT 4231541

Hello Looking for window handle cover for JELD-WEN window RIGHT HINGE. Picture shown is one with no cover (need replacement for it) and one with cover on it . I think its about 4 inch width.

The only information I have is on the shoe Pat. No. 6.704.165 Window info label at top is Norandex, Inc. /N. Kansas City. 00154 monton Windows 0008110818. 8/11/00 50 There are 2 coils on each side, I would also need the shoe, covers and bars that fit in the shoe .

The part I need looks like 95-112, but is wider. The 95-112 says 6 inside one leg and 1/4 inside the other. The part I need says 12 inside one leg and 7/16 inside the other. 95-112 is 1/4" thick, the part I need is 3/8" thick. Thanks for any help you can give me.

Hi there. I need 2 sets of right and two sets of left handed. Cannot locate by part number that is stamped on it. Maybe you can help? Arno

The trolleys that are showed above were ordered and shipped. The shiney gold plated ones are your 81-174. My problem with these are that the profile of the protrusions on the sides leaves these too loose. I received 4 loose and a bag of 10. The 4 match up with my originals. I understand that that yo ... (cont.)

MEASUREMENT IS 1/2" ON TOP

I am looking for drawer slide roller bearings The diameter is 7/8" 1/4" wide with a 1/4 20 bolt about 3/8" long Do you have anything that comes close to that ?

PLEASE HELP.

I need also balances orange color.

I don't know the pivot maker or part number of commercial door pivot. I want to identity the part and make an order.

Hello, I have a bow bay window with multiple double paned windows which I am replacing. The bead is older and brittle, not sure of the window manufacturer or the make of the bead. Its about 1"

Not exactly sure what this part would even be called, but it goes in the sash balance for a storm window. We have looked everywhere for this or something even similar and have not had any luck. If someone could help us we would greatly appreciate it. Thanks!

Will Product Code: 39-336 fit my jeld wen awning window? I have awning windows 10' and have lost one of the 'cranks' which is jointed with a pole ring. thank you for your time and consideration

I want to replace several sashes on Windows that no loner stay open. The tube length is 30 inches, tube tip color is blue, the bottom of the tip is 2 small pi s about an inch apart. What are your recommendations.

To whom it may concern, These are older exterior door and double door handles. The house I bought was built in 1998, and I cannot find door handles the proper size, and with the proper locking mechanism, to fit my doors. I also would really appreciate them being brushed nickle, instead of the gol ... (cont.)

Curious if you may offer some assistance. We have numerous double hung windows upstairs, I believe that they are Crestline. They are aluminum clad exterior and wood interior. There have never been screens mounted to the windows, evidently the original owner was to tight to purchase them. There ... (cont.)