Viewing all customer Discussions for:

Door & Window

I'm am trying to narrow down what parts I need. I have a 28" Caldwell channel. I am pretty sure I need your 350 channel as a replacement but I'm not sure about the sash weight. How can I determine which weight I need?

I need a 2230 channel balance with attacked foot and top. It looks like a 19-002 top I am not as sure about the foot. Measured from the wing to the tip of the shoe is 1.25". But measured from the divot between the wings to the tip of the shoe is 1" so maybe a 15-005? Can I get single and ... (cont.)

The latch was loose & fell apart. Can't figure out how to get inside mech. out. Thanks for any help.

The photo: Top were pencil is shows broken hinge 8 1/2" Bottom 9 7/8" Sides 5 7/8" Name on window frame: "A. W. Anderberg" I'm looking for 3 replacement Wickets, any help you can give will be very much appreciate.

I need to track down two of these parts but I don't know what type of windows. Do these numbers identify the company or where to get the parts? Thanks for any ideas.

Coil spring balance I have a dual coil spring balance I believe is off of a Certainteed window not positive . The spring has a 7BG stamped on it Thank you very much for your help

Window weight 11.6 lbs Length of tube 31 inches Width of tube 9/16 From my investigation the right part with bracket 17-012 # 32 should do the trick. Let me know what you think. Dan

Hello - I need a replacement for the roller shown in these pictures. The slot in the closet door that the roller needs to fit into is 1 7/8" and the center to center distance of the upper mounting holes is 3 1/2". The depth of the roller housing itself is 5/8". Do you have or can you recommend a r ... (cont.)

28" long with marking of b 2830

I have a number of windows all installed at the same time (approx. 20 years ago), but cannot find any identification on the windows. Attached find a photo of the pivot shoe balance with some dimensions. Could you assist me in finding a replacement? The barrel part is the only failed part, bu ... (cont.)

Name in the channel - 28 3 CALDWELL HM measurement 29 inches between the ends of the metal

I am in need of a storm door lock. Please let me know if there is a compatible option for the diagram attached.

I have attached 3 photos: one each of the numbers from the window frame, the locking item on screen ( which I NEED), and picture of the screen itself.

I was happy to locate the correct rollers on your site. No one else had the Flat Tandem rollers for a fair price (81-151). Do you know what the correct procedure would be to replace them on my door? (See pictures) The channel is very tight and I could not get the old ones past the weather strippin ... (cont.)

I am looking for replacements for Caldwell channel balances with the following info: Marked with the following: 20 4 Caldwell LM Length of metal piece: 21 inches Width of metal piece: 1/2 inch Depth of metal piece: 5/8 inch I have a second one with the same dimensions and marked 20 5 Ca ... (cont.)

Hi. Bearing are gone on the patio door roller. Door is still in grt shape. Wondering if u can help identify. Thanks. Sean Goodman

I need to replace two spiral balances in a non-tilting aluminum window about 14 years old. I have identified the part needed as S400-30 red. bracket I hope you can help me with how to remove the old rusted bracket to install new ones #17-031

Serial number A 15359 Looking to replace handle

Sliding Door Tandem Roller. Need to replace. Binding up. Outside of Rivit to rivit is 3/4". Steel Box is 31/8" long, 1" high, Wheels appears to be 11/4. These are worn out. I have about 8 total I need to replace. The door they are on is a Smed Door Product out of Canada who is no longer in business. ... (cont.)

Need 6 with stamp markings 2440 and 6 with stamp markings 2040. 1/2" wide.