Viewing all customer Discussions for:

Door & Window

Hi here are pictures of the balances I need to replace Thank you.

I need to replace this pivot bar on the other side of the window and need it's id number. Thanks!

Sorry No hints anywhere on door on who manufacturer is. I looked everywhere.

These lifts are on my Pella vinyl tilt window. The sash weighs 39 pounds. I would like to replace both balances , Slide blocks and metal pivots on sash could you please help me with the Part numbers thank you Brian

Hii have ordered pivot lock from you, however the sash balance cords has been deteriorated, I am checking if you are carrying the cords for that or purchase the sash balance? parviz aminifar thanks

I need window balance. 30 inches long. Also shoe 7/16 inch thick

Hi Swisco team, I need your help! I have a few broken hinges on windows from a church building built in 1966. Could you please view the photos attached and let me know if you can assist us? Thanks a bunch!

I have a Mi model 910 vinyl door that needs a new screen door latch It uses 3 screws to attach it 2 into the aluminum and one thru the screen. Hole to hole spacing is 2-5/8

This is a handle on a screen door from a Boneeville patio door circa 2000.

Hello, I need to replace the right and left side casement operators in a JT Garden window. The attached photos are of the left side operator. The 39-466/467 have the same hole pattern but the arm is slightly longer I think. Can you please help me with the correct part numbers for the replacements ... (cont.)

Replacement operator

I have a non-tilt single hung that and I need replacement balancers. The current balancer is stamped "Caldwell IQ 27-5." The metal rod is 27 7/8 inches long. I need help with the right replacement part. Thanks, Ray

The thumb lock broke off of our JW sliding door. Would you know what part I need to replace?

Looking for screen corners

Hello, I am looking for 3. They are on the right from the inside: the long arm could be 9.5". The shorter arm should be close to 4 3/8". Brown. Right fromthe inside of the home. There is a number on the operator 20810A. Thank you!Please send info to

1 7/8 length 1 1/2 width depending where I measure it at depth of channel possbily 1/2

Hello, I need a replacement part for 25 4 ES CALDWELL. Both top and bottom shoes have wings. Thank you

Replacement rollers needed

I’m looking for something the equivalent of this if you could help me that would be great.

I have a Certainteed awning window (1996) that needs a new dual crank arm. The windows are 60" x 24". It looks like the 39-140 product (dual arm crank 16") should work, but I just wanted to send photos so you can confirm.