Viewing all customer Discussions for:

Door & Window

1/2" wide x 14 5/16" long. Stamped marking says 14. 3.

I need this balances in 36 inches . It has a stamp of 3635

message

Thank you.

I am looking for this part that is in the track that the bottom of the window snaps into. Can I replace just that part or does the metal piece that goes up the track also have to be replaced? Also, are there installation instructions on how to replace it?

Hey Swisco! I’m looking for a part number for this hardware. Does it look familiar to you?

need 2 full assy. note, hook on topthat is attched to the string

I have two windows which need these pieces replaced. So, am talking about 4 balance bars (with grey shoes (20-3) and four pivots which match. Since I would like to keep these windows a while longer, would like some extra parts..Hope you can help, or point me toward someone who can. Thanks, in adva ... (cont.)

I want to see if I could get this balance before I attempt to remove it. It doesn't have the cut out in the track to get it out so I'm going to try to pound a wedge in there to spread it enough to remove it but only if I can get the part, do you have this part? thanks

How do I know I'm getting the right bead? I don't see the window type stamped anywhere on the window.

I have a 2390 BSI EA 36 Window Balance that is 23 7/16 length x 1/2" width and I need 2 of them of course. I found a pic of it but that one is a 36" long(plus outer fittings)

Hello my home was built in 2010. My blue prints say the windows manufacture was Better Built. they are 2940 BSI and the measure 30inches.

The length of the channel is 27". OEM marking is 26-4 Caldwell DM. Picture 3, one of the tabs is broken off the guide.

I have a single-hung window that no longer stays open - it won’t hold its position when lifted. Could you please help me identify which part I need to fix this issue?

I need to buy new parts so that my window stays open. I need to replace the coil and upper and lower "shoe". I need help with identifying what parts I need. I'd like to buy a whole assembly if that's possible or at least all the parts piecemeal so I can fix the window. I need left and right parts. ... (cont.)

My window balances are 9/16" wide x 9/16" thick. Do the series 770 balances meet these dimensions? Your description only says they are 9/16" wide. Thanks, Bryan

My windows were purchased from Home Depot in June 2006. One of the windows has both ballast broken. In addition the push sash releases are bad as well. Are you able to provide replacements? Thanks in Advance donnie

I beleive it's called channel balance ur I don't know the exact details of it I believe it's 30 inches

This a coil spring for a Certainteed lower inside sash. I need help indentfying your part number

This locking mechanism on the sliding door works. The latch on the door frame is broken. The latch pictured is broken on my other door. Need replacement part.