Viewing all customer Discussions for:

Door & Window

have some Kinro windows bad balancers.........pictures attached....is 27 inches long and 1/2 inch wide........appears to match your 385/27 with standard ends for that. No numbers anywhere on the balancer. Sash feels between 20-30lbs...can you identify from attached pictures and information. ... (cont.)

I am looking for 2- 72" tracks; one top, one bottom including all internal hardware components. The 4 mirrored panels including the spring loaded pins are all I want to use, I would like replacement parts for all other components.

I see that this is a common practice of the gears stripping???? operator #1521101. These are 1996 and have needed replacing before... I am in need of this operator 1521101... info on ordering THANX T.H.

This roller is for a Pella sliding screen door. There is a number on the actual roller. 777K The part that slides into the top of the door is 5/16 inch thick. They attach inside the door with a Phillips head screw. I need two of these. Thank you.

My problem crank assembly appears to be very much like your part numbers 39-150 and/or 39-094. However, mine does NOT have the screws that mount the cover onto the assembly. Length wise it seems to be in-between these two are far as the armature.

Need replacement roller for kitchen cabinet. 1/2 inch diameter. Thank you, Robin

We need a replacement casement window crank. This crank is on the left hand side of a verically (left to right) opening window. The whole crank is not functioning and we would like to replace it. So we need more than a new handle, the whole mechanism to open the window. Do you have a replacement ... (cont.)

Part that keeps you from raising window all the way up when it is slide out. I can find no numbers or names on the part. I am in need of four - my kids tried to raise window higher and caused them to crack and come out. The windows were installed in 2009. Thanks for your help.

5" long piece that is secured at the back of the cabinet. No names or numbers on it. It is very old. The runner and the connection to this part is 23" long. Can you help us with this?

How long is the metal part that goes out from the roller. Part #84-078

does the adapter plate change the 4.5 inch dimension in the photo attached so that I can use the 39-264?

Do you have a video or instruction guide on how to install these type rollers and how the door may be removed. It is a Wasco and is on the inside of the house. Basically the existing rollers allow the door to sag enough now that the top of door will pop out of track if door is pulled inward while sl ... (cont.)

I have a 28 inch Chanel they is broken. The stamp on it is 28b it is for a tilt window. I believe it would be your 750 series. Would you have these in stock and how long would shipping be?

I have a Peachtree casement window that doesn

Please find a window part I need. The whit plastic is 1 1/4 inches a little over a 1/4 inch deep. Thanks Joe

I attach the picture of coil. I'm thinking of number 6, but please check and confirm for me. My windows size outer of glass is W 31' x L 38".

Hello need help finding a bath room window run channel I found these # 11 2 cr. Caldwell Thanks Fernando C

looking for 7/8" high x 5/8" x1/4". do you sell this size

Need both replacement parts for glass door and screen

I believe the window shoes need replacement because the part at the top of the shoe that hooks to the balance has broken and the balance retracted to the top of the window channel (hopefully I'm using the right terminology). I think the part I need is 1-1/4" T-LOCK BALANCE SHOE, CLOSED CAM (Product ... (cont.)