Viewing all customer Discussions for:

Door & Window

shoe measures 1 1/4 wide at top--2" tall---9/16" thick--- socket measures---3/8 wide---1/4" tall (opening)

Hello, I need to order 4 new balances. The measurement from end to end (per the video) is 35 inches. I attached the photos as well. Thank-you, Michael

I need four replacement balances for my two "Seasons Shield" windows. I don't know what to order. Rebecca

WE ARE NEEDING 6 PIECES LIKE THOSE SHOWN IN ATTACHMENT. WOULD YOU HAVE THEM? ROGER

crank handle - looks like your 39-104

First off thank you very much for providing this service of helping people identity window parts. Both this site and your youtube videos have helped me gain an understanding about all this. I have recently bough a house and unfortunately some windows have an issue with the pivot bars and locks s ... (cont.)

Don't see any markings. Really hope to use existing holes when replacing. Thanks for any help you can provide. Bill

I'm intimidated with picking the right pivot lock shoes. Can you help? I have metal coils that create tension. The windows are great, I just have several shoes where the plastic or the metal has snapped. Pictures attached. One picture is of a functioning shoe and there are several pictures of ... (cont.)

I am in need of a replacement door handle on my slider screen door. Here are the numbers listed on the door tag:AAMA, Code S-082-1, 101/1.5.2.97, Series 850 SGD, MST 6068, NFRC 100/200, ASTM F842. Please let me know what the part number is so, I can order a replacement. Thank you in advance.Darle ... (cont.)

I would need four units. The window sash is not more than 20 lb. and is non-tilt. The current spiral head is red. It is a vertical window with one spiral in each side

I just ordered some balances Series 600 28" Blue tip and noticed that the diameter is larger that the one on the left in the attached image. Will it still work? Thanks in advance. Curtiss

Purchased two 15-045 a few months ago. Made it work but had to ream out the hole for the window mount tab. The dimension of the shoe I need is 3/8 thick, 1 3/4 long, 15/16 wide. The top of the shoe shown in the picture is broken off.

I am trying to help a family member repair broken windows. Two windows have no window balances in them at all. I found a same size window for one of them and removed the balance. It is a 2730. I also believe I found the balances for the bigger window. I think it is a 2740. I measured the end to fig ... (cont.)

Repairing some windows at our Legion Post and have had great luck finding parts at Swisco. Several of our windows have pivot bars missing or bent. Ordered SWISCO Part Number: 26-040, 3inch pivot bar. Works great, however have sashes where the pivot bar holder is broken (bottom of window on left ... (cont.)

The base "fork-like" part says #9429 40MM. The picture shows the handle & base separate. That is because it broke. The intact handle says HTL on the window part. What is the replacement parts I need to order? I also need a draw guide. Do you sell them? A picture is attached as well. I need t ... (cont.)

My tenants managed to disassemble my Milgard single hung window. The sliding, not tilting, lower sash is small, only maybe 16 inches high and a couple feet wide and weighs just a few pounds. I found ONE balancer on the sill but there are no numbers stamped on it and I've scoured the surface several ... (cont.)

This is a almond or beige Glazer bead I need help locating Size is 1/2 inch that goes between glass and frame Size is about 9/16 that goes across front of glass

I need to replace the entire channel balance. I believe The top is a 19-002 but it seems the shoe may be a 15-003 since it seems to measure 1 3/16". I do not see complete a channel balance with a 19-002 and 15-003. I only see Series 351 which comes with a 15-002 shoe and Series 390 which comes ... (cont.)

Hi, Do you have this part? It is it for a sliding glass door that was installed in a mobile home. Thank you

Hi, The mark on hardware is 27 4 FN Caldwell. I need to purchase two replacement parts. Please help me find the right part number. Thanks Hui