Viewing all customer Discussions for:

Door & Window

Good morning, I tried to submit the standard inquire form but an error occurred. I need 2 new window balances. The length is 30 inch, for a Lawson non pivoting slider widow. The weight of the window is 45 pounds Will attach pictures of both ends of the balances. Thank you so much please c ... (cont.)

What do I need to fix that window ?

Just bought a house Which is about 10 years old. I have 10 channel balances that are broken and need to be replaced. They are both left & right sides. I found a patent number: 5737.877 on the white plastic component. The pin on the window edge is rounded and has like a head on it. The concept is ... (cont.)

Need to replace left window latch (end tab that holds window in door broke off). Is 91-022 comparable to 91-140 since I only need left one?

I need a replacement for this part because the spring broke. This is a push button handle on the inside of a storm door. On the outside is a brass Andersen turn handle.

unfortunately, there are not any identifying markers i could find. I am replacing pivot bars as well that are 3" long

do you know what kind of corner keys are holding frame together? there are dimples on the edges not on the face of frame.how does it come apart? THANK YOU.

Hello, I am looking to replace some Metal Cams and some window pivot bars.I have attached 2 pictures of my shoe assembly.Any help would be greatly appreciated. Regards,Joe

I don't see any names or numbers on any of the parts. The coil measures 3/4 inch and fastens to the shoe with a screw. I recently moved into the home and discovered this damaged part trying to find out why the window would not close, so don't know how it was damaged.

I have a mirrored medicine cabinet in my bathroom, the rollers are worn out and the mirror no longer slides, I am looking for 6 of these little roller assemblies, or something comparable. Thanks, Vidal

My pivot lock shoe measures 2" high by 1-1/4" wide but the depth is 5/8 not 17/32 like this shoe. None of the other 5/8 shoes looks like mine. Would that small difference in depth be a problem

I need the keeper for my screen door. The handle is very much like your 83-126. I sent my handle as a sample # 24060. Please help me find the keeper and return my old handle with it.

brass roller (7/16" dia, sits in 1/2" opening) suspended in a white nylon or teflon matrix (L=1 3/16", W of narrow part 9/32" W of wide part 1/2"), 4 on the bottom with 2 near the leading edge and 2 near the aft edge. Looks similar to part# 87-147 but has brass wheel and is longer. MasterView Slidi ... (cont.)

Looking for a replacement (metal roller) for a sliding screen patio door. The manufacturer is Unique Home Designs. The door is the Ultimate White Vinyl Sliding Patio Screen Door.

Need 3 different spiral balances. All 3/8" Tilt. Need 2 at 35" length for 28 Lb Sash. Need 2 at 28" Length for 17.6 lb sash Need 2 at 17" length for 11.2 lb sash What color tips do I need for each?

regarding replacement pivot pins for home double hung windows installed in 2009.

The metal part of the balance is 29.5" long and 3/8 dia. the nipple is yellow. what is the best balance to get?

I need (40) pieces of 55-301 but mine is sandstone. Is there any way I am able to retrieve that?

I have 6 Windows I need parts for. 2 Windows are 28 inch and I need the balances for those so 4 of them. I come up with part number S390-28. The sash weighs 25 lbs. the feet on my window are 1-1/8. So I need 4 of those balances. I need the top caps....... 12 of them and I have part number 18-179 ... (cont.)

Hello, I am looking for parts for my windows, I believe they are patriot windows but not 100% sure. I have also attached or included pictures of what the window and parts in question. There is also the window identifier tag which may help you in providing me the parts I need.- I am looking for ... (cont.)