Viewing all customer Discussions for:

Door & Window

no name on window hardware has number 21550 also the word truth it is a double casement with stationary center pane

I was inquiring to see if the adapter can be used on the door frame attaching to a minion at the center of the door. (Inswing door bracket 40-006) Thank you in advance for your help

The latch broke on my sliding door handle and I am wondering if you recommend the 82-262 or another model. My guess is that the doors are original to the house, so probably 1958. Can't find any sign of a manufacturer. Pictures are from the other door that is still working. Let me know if you ... (cont.)

I have a window with both channel balances gone. The replacement top sash guide (I have one) is definitely the 18-036, which is 1/2" wide. Which channel balance? The 350 series is 28" long and 9/16 wide. The 800 is 29" long and 3/8 wide. The side of window has a 1/2" wide channel, w ... (cont.)

Hi attached are a couple of pics of my window hardware, the pivot bar on the opposite side has broken but I was able to match it to your 22-226 bar but I am having trouble locating a coil balance shoe to match the pic, I am not even sure if I need one or just a new coli? coil has come off the base, ... (cont.)

A window was not latched properly and pivoted out on to the floor. Both bottom pivot bars that lock into the sliders broke off when this happened. We need two new ones. Thanks,

I have several of these that have broken (the cord is broken). They are stamped 2730, and they are 1/2 (9/16} wide. The plastic guides (ends) have broken, and I want to replace the whole guides (with ends). Your pictures appear to have the complete deal, guide and plastic ends. Other places I've ... (cont.)

Dear helpful Swisco people, We need to replace block and tackle channel balances (more on that later) and some pivot shoes. I would like a shoe that allows the window not just to tilt, as we have now, but also to allow us to lift the window out. As they are, we have to unscrew the pivot bar, sli ... (cont.)

Good Morning, I need some help in identifying a channel balance that I am replacing in a couple of windows in my home. From the instructions on your website, I have measured the item to be 29" long and the width is 1/2". It appears to have a top similar to the 19-005 and a shoe similar to ... (cont.)

Can't quite read what it said on the unit but it looks like...6097p, 6498p, on the longer ones, and 6d97p, on both of the short ones. What don't make sense is the longer one is right and left crank so different numbers, but the short ones are also right and left but has same numbers. What is wor ... (cont.)

Pictures attached with the label and part that I require which is part of an Install Kit per the techs at Silverline. This part is for the stationary door on a Silverline 5500 series patio door at my rental condo. Thanks! Rick

no names or numbers found. Photos on 1/4" graph paper. Appears to be product 81-158, could you please confirm?

I need to replace my window balancer. It is out of a MW window produced in Feb 2006. It is a tilt window. The channel itself is 34" long, and has the stamped marking 34C. I think i found the balance in your catalog, but nit the correct ends. I have attached photos for ref. Can you advise me wh ... (cont.)

I believe it is a JeldWen, but since it is about 10 years old or so, they say no. Attached is a picture of the lock. Thanks for the help! Ricardo

Looking to find replacement glazing bead for a white, 310 series double hung from Maritech windows in Texas? Apartment complex in Lincoln, NE with numerous hail damaged windows. Looking for a glazing bead that will work to replace the one shown or best alternative.

Hello, can you tell me if the LENAHAN WINDOW CRANK Product Code: 39-074 comes in white as well? Thank you for your help in advance.

I'm trying to determine if the series 140 balances would be a direct replacement for my existing balances.

What is the difference between 407 Series 170 and 407 Series 171? How can I tell which one I have? I only see "407" stamped on the spring. Thank you.

I need help locating a replacement. Obviously this one is broken but the measurements are as follows. I used the measurement examples shown on your website. The top ( as shown In the picture sent) is 1 and 5/16 inches wide. 11/16 inches on the right side down on the base, and the angle on the bo ... (cont.)

I cannot identify the brand or find a suitable replacement for this window glazing bead. I found these letters and numbers on the bead. PSC 6 C4A4 3875130 1467432 17' 13 08/25/93 1145009 3314 R116PWD