Viewing all customer Discussions for:

Door & Window

Any suggestions or helpful info on sizing/making the receiving holes in the wooden door frame? The screen I'm making is for the top half of a split door that was not originally built to host a screen. I'm imagining using the spring loaded plunger pins on all sides of the aluminum screen frame to fi ... (cont.)

YOU WILL SEE IN MY PICK THAT ONE OF THE DIMENSIONS IS 5/16" HOWEVER IN MY APPLICATION THIS HITS THE BACK OF THE SOCKET THAT IT GOES INTO KEEPING IT FROM SNAPPING INTO PLACE. I AM NEEDING ONE THAT IS ONLY 9/32" OR 1/4" VERSUS 5/16" PLEASE TAKE A LOOK AT THIS Please Advise. Thanks AJH ... (cont.)

PGT window that only goes up and down.

I'm looking for the part that the lock goes into to lock. If not sold separately the whole lock Assembly.

I need a replacement keeper for my sliding glass door, which has the name Pella on it. The part that seems to come closest is part 89-029, which is a Viking part. I compared depths, and the depth of another keeper in my house is 5/8 *. The screw holes are in a square formation, 1" on a side. The wid ... (cont.)

Part secures window into window frame. I need approximately 1 dozen replacements. Thank you. Cindy

I need to replace my plunger pins. what is the difference between the 70-008 and the 70-009? Are there white plunger pins? do you sell white lift tabs and does one size fit all? What is the difference between the step down drill bit 75-032 and the 75-503? Price is better on the 75-503. ... (cont.)

What actually holds the roller assembly in place. I'm doin this for my kid and both bottom rollers are gone

Hi, the part ID on your website won't accept my post.. here are some pics of what I need I don't see anything close. Thank you for the help! Brittany

Hello, I need to replace several window channel balances (please see pictures). They are 26 in. long and 1/2 in. wide. They are marked "25 4 KN Caldwell" and are approximately 22 years old. I don't know the weight of the window these are supporting, but it is vinyl framed and 44in wide x 28in ta ... (cont.)

Is this series 380 or 385 Channel Balance. I cant make out if the shoe is 15-004 or 15-005 The metal length measures 24" but stamped 23 The width is just more than 0.5" but stamped 5. Stamped is 23 5 ER CALDWELL on metal rod. Pictures attached. I need replacement channel balance fo ... (cont.)

I need the coil balance shoe that looks just like your product code# 15-177. The measurements are: ↕ 1.3 inches tall, ↔ looking from left to right front: 1.2 inches, depth (front to back) .09 inches. Do you have these, if so, can you give me the part number to order? Thank you! ... (cont.)

We have tall double hung Viking window each panel about 18" W x35" H. I don't know how heavy, but I guess about 10-12lbs each, possibly more. We had to replace the broken glass, but now we need replacement parts: - coil spring 4x - coil housing pivot 2x - tandem coil housing 2x - mounting bracket 2x ... (cont.)

I'm trying to find the replacement balances for an unknown window manufacturer that had white tipped spiral balances. I purchased S900-16 red tipped balances, thinking that their ability to carry the heavy load of the sash would be a better idea, but I was not able to increase the tension of the ne ... (cont.)

These pins are from windows produced in the early '60's. They have a nail like metal pin that goes through the "plastic" arm and body pivot arm, supposedly to help with window centering. There are no markings on the pin and none on the window that I could locate.

It looks like your part 82-008K

Vent Lock Product Code: 26-122 Do you have these in black or do you know where I can get some in black or a darker brown I need lots

Looking to replace both left & right units. I found this number on the left one: BP8 12#27 3-85 Is that sufficient to find a replacement part #? Thanks found your video very helpful, Barry

Looking to replace the attached handle which had a "DNS Ind. Miami Fl" stamp.

See photos