Viewing all customer Discussions for:

Door & Window

Hello! I bought a mortise lock from you but it doesn't fit (I dropped the original in the door). I *think* the attached would work based on the keeper I can measure. Do you have a mortise lock (no keeper needed) like the attached? Thank you!

How many of these clips should I use for each screen? 1 on each corner (4)? 1 for each side(2)? 1 per screen?

We ordered your part # 82-107 : Sliding Door Latch Lever Kit thinking that was all we had to replace, but then realized that the "bar" (not sure what it's proper name is) that slides into the lever and the key cylinder looks to be cracked and that is what actually may need to be replaced. But I can ... (cont.)

I have attached some photos. Full length is 1-3/4", bottom of hole is about 1/2" from the top, Flat (chair seat) part 3/4" wide, cross section at bottom of "chair" approx. 1"wide, back of chair, top to base (seat)1-1/4". This is for a spiral balance for a tilt window. Please let me now if I need to ... (cont.)

Hi my name is Themis and I need a locking handle like the two images shown above. This locking handle is from the original patio door I bought in 1996 from Home Depot. Kindly please let me know if you have one. Thank you.

I need several replacement handles for these windows

Just says IWC on it. The hooking mechanism isn't working. Can it be replaced?

Hello, need a replacement for attached crank and mechanism, i show it as LH Window Crank Operator, 3/8" Hole 39-193 just want to be sure, thanks! John J

We need to purchase complete mounting hardware minus top and bottom track for 10 doors. Doors were manufactured around 1970. Thank you Jim

Greetings! What are the dimensions of the 81-041? It appears to be the rollers I need. My dimensions at 3/4 W 2 1/8 L 1 7/16 H with a 1 1/4 diameter wheel, 5/16 wide, concave

Patio tandem roller of this type of below photo

Does any of your Pella casement 1 piece Bottom Hinge fit my Pella wood casement window vintage 1978, Bottom 2 piece Hinge with White Plastic Pivot Hinge with rollers? Also how do I order the white plastic pivot hinge pcs for left or right opening windows? These parts are left or right specific. I ... (cont.)

I have a locking screen mechanism that broke and it looks similar to the one listed in this thread except mine does not have an opening. There is however an hole where the broken on is. Would I also use this replacement part as well ( 90-026 One hole sweep lock)? I'm also looking for the window ... (cont.)

Hi, please see attached photos of the atrium wood hinged door broken door lock and handle. We need to replace the whole assembly.

Need price and availability for this type of window hinge. The brand i have is Anderberg.

I have a 15-177 shoe with broken screw applied 3/8" coil. What coil should I use so I don't have to buy new shoe or pivot bar? Not sure if 1/2" coil will work? I'm sure of the shoe part number not the coil?

Hi, The string became detached from the balance spring on one side of this single hung aluminum window, and I wonder if you carry this part. The first photo is hard to see but shows the full length of the square channel, with the string at the bottom and a fastening screw at the top. The strin ... (cont.)

I have a casement window about 20 years old need to replace seals the only markings on it are for the crank Hardware. The hardware says entry guard truth. Thanks for the help Brian

Lock handle broke off in my hand when unlocking slider. Can just the lock handle be replaced or do I need a whole handle mechanism? The screws are 3 15/16 on center. What pieces do I need to repair? Thanks, Garrett

DO YOU HAVE THIS?