Viewing all customer Discussions for:

Door & Window

Do you have any information abiout how much weight this wheel can handle ???

It seems like the closest match I could find is 81-039. the only difference is the wheel on the roller I have is 1 1/4" DIA and mine has clips and the one you sell has dimples. Could this work? If not do you have a match?

What single arm operator works with the Truth Folding Handle with Cover, 39-375?

Good morning, Attached, please find two photos I've taken in an attempt to identify my broken window sash. Here's what happened: I think I attempted to tilt the window before lifting it up high enough. As a result, I broke the two C-shaped brackets that usually travel in the track with the b ... (cont.)

Hello, I have an older apartment building - the windows swing out horizontally, I believe they call them Awning windows. I have this crank that is broken and need to replace it. I dont know the mfg, there are no numbers on the part. Also these windows have plastic clips that when your crank the wi ... (cont.)

I need to replace two of these latches. I'm finding they're not very forgiving if I don't have them in the exact position when I close the window. MI said you might have replacements. Thanks.

I have a spiral tilt window balance that needs replacement. Here are the dimensions, 3/8" diam x 26" length: window is 34" ---> x 26 7/8" ^ weight is approx. 15 pounds. On the tubing JR either P or A is written on it, plus number 4. Could you recommend proper balance and tension tool, and price? Ho ... (cont.)

Hi, I am looking to replace an old Truth operator. The current operator tip to tip measures 22" closed. The old one was missing a handle so we fabricated one to make. It is on an Anderson awning Window. As you can see by a picture of the side view I have ample space to replace it with the 39-070. T ... (cont.)

CAN YOU PLEASE HELP IDENTIFY THIS PART AND PROVIDE PART NUMBER. THANK YOU.

The length is 25 inches. Can you tell me which part to order? Thanks.

I was able to open but not close my bathroom awning window. Its like the gear stripped. It is a right hand crank. The manufacturer is Alcan and it was installed in 1986. The inside of the handle is stamped -11500-11 Pat Pend I can send more photos. I was limited to 5 in this submission. Thank you. ... (cont.)

32", 5/8" deep window balance. Plastic shoe is about 1 3/32" deep. 3140 stamped on balance. Can you help me with a replacement?

WHAT IS CORRECT ROLLER FOR PELLA 8FT SLIDING DOORS DATED 1985?

Please let me know if you have something available like what is in the pictures. Please let me know if you have any questions. Thank you.

I need this Pella hung window latch

Hi, From the photo......do you have what I need? The holes are 1 1/2" on centre not 1 1/4". Thanks, Dennis

Hi, I need to replace some springs labeled with numbers 28D and 28E for left and right side respectively. The metal channel is 29" in length and 1 9/16" in width. The shoe and top have wings and the shoe measure is 1" in width. I believe part number S380-29, but will kindly need your confir ... (cont.)

29 9 30" total length Milgard aluminum single hung dual pane window with grid The sash is 29.8 lbs I need 12 balancers

Can you provide some instructions on how the 15-046 pivot shoe is to be properly connected to a 765 series plain channel balance? The channel balance I am replacing is exactly like your 765 series plain channel balance, but the pivot shoe on my window is a little different that the 15-046. It looks ... (cont.)

Dear Sirs: I've attached 3 photos of the rollers on my patio glass sliding door for your review. The wheels are 1 1/4" in diameter. I'm looking to replace them with a new set as they have worn out. After searching your site, I believe your part #81-030 looks very similar to the ones in the ... (cont.)