Viewing all customer Discussions for:

Door & Window

I have a Macor sliding glass door. On the handle 82-262 how far does the handle stick out from the door. The Macor is about 1-3/8.

Good Afternoon, Can you please tell me if you sell a latch and latch keeper for a toilet partition door that swings inward and outward. I can only find one or the other.We are building some plastic laminate toilet partitions. Thank you.

Hi, I'm trying to find the correct sash balance for my 1979 Andersen windows. I have the old balance out, but I'm having a hard time identifying the correct replacement I'd need from your site. Below are the numbers I have stamped on the balance...can you help me find the right product? D9 ... (cont.)

What is the minimum height of the frame necessary to re-install a crank operator. The granite piece that is the sill was added later and we don't know how much it covers of the bottom of the frame. The frame showing above the granite is about 7/8 of an inch. Each window opening is 16 1/4 wide and ... (cont.)

Please help me to find a 4' Top Sliding Door Track. Refer to the pictures for measurements and details (4' long)

Need window part

TRYING TO IDENTIFY THE BALANCE I NEED TO HAVE REPLACED IN MY MANUFACTURED HOME IN CALIFORNIA. 28" LONG 1/2" WIDE

Hi SWISCO, Can you tell me if the pictures that I sent of the snap bead is similar to your product, White Glazing Bead - Product Code 55-164 or would you recommend a different snap bead from your company? Thank you for your time.

I am seeking replacement window operators, both LH and RH for Caradco windows which were installed in 1966. The arm measures 14 1/4 inches as measured from the center of the nylon roller to the center of the gear. I have found no other identifying markings or stampings. Robert

I am trying to identify this glazing bead for replacement. I do not have any info about the window. Any help is appreciated.

I am looking to replace these rollers from my builder grade screen door but do not know who manufactured the door. Do you think your 84-100 would work? Thanks, Mike

I am renovating a house with old double pane windows that has snap-in glazing. I have no idea who the manufacturer is. One of the windows has deteriorated, cracked glazing that I need to replace. I have attached pictures. The measurements are approximate as the part is warped. I can tell when r ... (cont.)

The person, who took care of our house during a trip to Europe, damaged 2 of our windows badly. We have Caradco windows (built Jan/Feb 2003). The windows are both 1' 5" wide, Tradition Plus Series Casement Windows, single unit. Problem 1 (see picture 1 and 2). We have to replace the parts, which a ... (cont.)

There is a number 2 on smooth side of corner

i need to replace the channel balance in several windows. Please see attached photos. All of my windows have the balance 283088081P which is 29 inches. Looks like someone replace 2 of them in two separate windows with the 274000H which is only 28 inches.I don't know the brand of windows but I watche ... (cont.)

It's 21" long but the shoes attached top and bottom have wings (see pictures)

no markings, photo in millimeters

Looking for sash balance for 1974 Andersen 20" x 36" Double sash. Part is marked c136p23674 and measures 23/4" x 6". Picture could not be uploaded and you can not read the number on it anyway. Take my word for it, this is the number on it and there are no other numbers.

There might be a number 4 on the back side

I want to verify the correct parts to order. The window is Kimro, the channel is 27" long, there is a number 26 4 on the channel. Also, some of the metal clips are broken. Thank you very much for any help you can provide.