Viewing all customer Discussions for:

Door & Window

These are white, Andersen windows -- I put a ruler next to the part to assist with the size. It is the stopper that is put out, so the window can only be raised a small amount. When it is "in" (as it appears in the photo) the window can go up all the way. Please let me know if you require more or ... (cont.)

What is the ID of the nylon bushing and what is the attachment recommendation (screw or rivet)?

I need to replace 2 of my storm door pins for a anderson can this item be used 40-165 is the item code. Also what is the quantity.

i have a wood true divided light double hung. i think from 1988 the balances are in vinyl jamb liners and are marked w14r. i need two for the lower sash.

I need to replace the cover for a casement window crank. I have attached a photo where you can see that it has cracked at the top. However, I can't figure out how to install it, as the crank does not have the little set screw that holds in most of the other cranks, allowing it to be easily removed. ... (cont.)

Balance is 1/2" (9/16") wide, 21" long. Stamped 2030 Top piece is 1 3/16" long 11/16" front to back Has wings that span 15/16" Bottom piece is probably -001 1" from point to base 1 1/8" front to back 9/16" wide

You show the Sash stop as 4" length, what is the width and depth?

Window is Empire Pacific 4200 Series installed in 2005. Please give me a quote to replace the lock/latch item shown, which installs on the left side of the sliding window (i.e., the rightmost window in the full window image). I would like two latches matching the broken one and also one latch th ... (cont.)

I will need 10 cilynder the sizes are 29 inch long and 5/8 tick .. and i will need 10 pivot shoe sizes 1inch 1/2 wide ...lent 1inch 3/4 tick 5/8 and i will need only one handle ..so here are the pictures of one sylinder picture of one pivot shoe and one picture of one handle please let me know if y ... (cont.)

hi - another counter balance went on this window (milgard). also, it seems as though these balances are too strong for this window. i did a search and it appears that swissco is now the manufacturer for these parts? can i get a pair of counter balances with the next weight size down? the part nu ... (cont.)

balance is 18" window weight is about 8 pounds( is 41"x 40" ) no scale .sorry ,need to know what is the tip color I need .Thanks

do you carry a latch like this one?

Need part contact me with price and shipping cost to 08226

I have what I think is a 32" 795 channel balance that needs to be replaced. But the stamp reads 32G. I don't see an option for a 32G on your web site. Would a 32E be sufficient? If it helps my sash measures 51.5"wide by 39.25" tall and is double pane insulated. I was unable to weigh it. Here are som ... (cont.)

Hi, I'm looking for window balances for a Milguard 3-0 4-6 single hung window. The metal casing measures 24" long excluding the plastic pieces at each end. It measures 1/2" across the top where the writing appears and a little under 5/8 on the sides. The marking stamped on the balance is 23 4 ... (cont.)

I have been looking for a replacement latch but my door has only an inside latch with 3" holes. My problem is that the outside part of the door is raised and none of the 2 sided latches seem like they will work. Is it possible to use only the inside portion or do they need to be connected to work th ... (cont.)

I need to purchase a replacement for an EntryGard Truth casement window crank. There are two numbers on the crank: 20755,30842R As you face the window from the interior of the house, the crank is on the left hand side and the window opens out on the right. I have attached a file with a picture ta ... (cont.)

Shoe attached appears to be 15-005 1" and the top attachment is slightly different than the 19-005.

What's the part number of the rollers for the above mentioned slider? Do you have them in stock and price if so? Thanks, John

Hi I'm looking to replace broken vinyl screen track on my vinyl replacement windows. The track is used to hold the screens in place outside of the double hung windows. This track is removable but I can't find a replacement anywhere. Any help with helping to identify this track would be greatly appr ... (cont.)