Viewing all customer Discussions for:

Door & Window

Good afternoon, I am looking for sash hardware for "Action Windows" , Mfr code : AWT-1, 2000 series ( H - R55 - 44X71) I looked on your website but could not distinquish the necessary parts. I would appreciate any help you could give me in finding the necessary parts for these windows. ... (cont.)

I have it narrowed down to 28" 351 needed I just don't know the different options and what they represent. The one is a large oriel single hung(34x66) the other is a regular size bedroom dh (32x54). Please advise. There stamps have faded and only state UNIQUE.

I have Pella Casement Windows 3/8" splined. Do you have anything that will work?

I can't see a match on your website... It's been so long since I removed these, I can't find the remainder of the "tail" ... I've drawn in where the tail was, but don't have the hole spacing, but it's not important. I'll just use new holes to attach. I'll need 2 pair. Both upper and lower are br ... (cont.)

Inner assembly (where handle connects to) came out when turning the handle to close the window. In trying to re-insert turning gear the threaded brass insert (see photo) will not engage. Either the threads on the brass insert are worn down (I'm hoping this is it)or the threads inside the casing ho ... (cont.)

I need to buy 20 of these for an opening that is 1" long and 1/4 in wide ? Any suggestions?

Hello, I have been in a long time need of a handle and locking mechanism for my sliding patio door. I have perused your web site and believe I have found what I need, but would like a second professional opinion. This door handle and lock has been missing for quite some time and the parts and ... (cont.)

Hello...I would like to find out if it is possible to add a crank-out mechanism to metal frame casement windows that do not presently have them. At present, you unlock the window and just push it out to open. I want to make them more secure and burglar proof with a cranking mechanism. Thank yo ... (cont.)

Only thing we could find is "patent pending" and "A/2" Need several of these.

I need a new operator for a Anderson casement window CSW -5, right-side, locks on left. Made in Jan 1980. I know its a straight 9" (estimate)arm. It looks like part number 39-095 is the correct one. Could you verify for me and confirm before I order? Thank you

I have several pivot boots that have broken and need replaced. My sashes say Traco-1-77 inside of them. The pivot boot is a white/cream color. It is 1 1/4 inch wide, 2 inches tall, and about 1/2 inch thick. It has Patent 3,055,062 stamped on it with a 3 above that. No other distinguishing marks. Tha ... (cont.)

I need to replace the handle shown (45012) with one that folds back so a blind can clear it. It seems that the 39-205 would work but the 39-107FK would be even better if the cover would work with my mechanism. I can see the word Truth shown on the mechanism. Can you tell from the pictures if the ... (cont.)

The nylon housing has two holes for the wheel. I like to have the wheel moved to the other hole since I need it a bit higher. How do I get the Window Roller BB Wheel to move? The item is: Acorn Sliding Window Roller, 9/16" BB, Product Code: 87-010

There are two of these that sit on top of the window and work with the channel balance. I installed new channel balance guides and the one pictured snapped off the left side of the window. While reviewing the picture tips video, the part I need was pictured at the 1:30 mark of the video. The ... (cont.)

The shoe is 1 1/4 in. wide, 1/2 in. thick and 2 in. tall. The thickness of the bar which fits into the shoe is 3/16 in. I would really appreciate your help in finding replacements for these as the plastic is failing in most of them. I can find no inset to put the new shoes into the track. I ha ... (cont.)

I am looking at your product on line. The 26-419 seems to be the closest i can find. Thanks brad

Help! I recently ordered and received a 31" Series 385 Channel Balance S385-31 option: 3030. I installed it without any problems. I was very excited about repairing the remaining windows in my family and dining rooms. I ordered six more pairs and began installing them. Unfortunately I have had ... (cont.)

I need a new set of rollers for a pella sliding door. It is an older wood/aluminum clad model with blinds between the glass. I want to be sure I'm ordering the right rollers. I have attached a few photos of the roller and door to help identify. There are no visible model or serial numbers on the doo ... (cont.)

I have a window without balances and need to know how to measure the sash to order the correct length. I ordered 28" series 351 block and tackle for another window and it was fine but this window is shorter and I am not sure how to measure the sash. It is missing it's balances all together, so no i ... (cont.)

I need to know what is the best way to identify the channel balance that I would need to replace the existing, the 2810 number is not a part number.