Viewing all customer Discussions for:

Door & Window

I am having trouble finding a replacement for spline on my 1980 pella screen door. The gap is 3/16". The existing spline is gray and measures 3/16 x 1/4". Thanks, Cheryl

Here is a picture of the numbers from the handle I have today, it goes with a Truth crank for my ROW window. Wondering if there is a folding handle that will work that will limit issues with blinds etc. The circle is 3/8 where handle attaches, the stem is 11/32 with 12 teeth. Thanks. ... (cont.)

Looking to purchace 10 pcs but can not find. Goes with Round Sash Lock #90-276

I have a 25-30 year old wooden Andersen double hung window. Each glass pane measures 24 1/2 inches wide and 22 inches high. I have the old balance out and the markings on it are: C17 6#31 3-85 Please let me know what balances I should buy from you (I need two of them). Thank you. R ... (cont.)

I have a window that is single hung non tilt and the mechanism that pulls it up and down is broke. The measurements are 1/2 inch wide by 27 inches long. I think the number on the top is 15p142, and the shoe is 105p with a 102 in a circle and a 2 by itself. On the carriage there are numbers 25. ... (cont.)

1/2 inch channel balance top 19-010 bottom 15-004 20inch length 1930 weight assembeld i need 10 of them

Problem: Window locks have literrally shattered, cracked and broken. After attempts to buy locks locally none had a long enough lock latch. I've reviewed your web page and feel confident the lock I need is the 90-063W. Below is the only pertinant information I could gather off the window ... (cont.)

Hello, I need replacement parts for my jordan non tilt out windows. The channel balance is 29in and I believe balance top is 19-002 and bottom is 15-001 if correct it needs the 29"series 390. I do not know the strength or stamp option that my channel balance should be. The old balance has "28C" stam ... (cont.)

I'm looking to order a silverline folding handle part # 07-OP05-7811-03

overall length of spring pin is 1 3/8 inches made of grey metal with light brown plastic tip. The head of the pin that inserts into frame measures approx. 3/16". The house was built in 1990-1992 so screens are from that time period.

This hardware was built into a set of very heavy custom wood/glass sliding doors in 2005. Do these rollers require lubrication or other maintenance? Thanks.

This is a glazing bead I need to replace. I did not see it at home depot or lowes.

I have about 20 Semco double hung tip-out windows all with similar problems with the shoe. I found part # 15-014 that seems close but mine are a little less than 1" wide. (3/8" X 15/16") Any ideas?

I need to replace 2 Caldwell channel balances. The balance is 27" long and 1/2" wide, inside depth is ~9/16". See photos attached. My main concern with the replacements is the width of the hook that attaches to the sash. The hole is my sash is 6mm and the width on the Caldwell hook is 6mm. I ha ... (cont.)

My window hasn't been staying up right so I opened it and found out that I may need a new coil.

I need to replace several balances in my MW Twinseal single hung windows that were installed in 2000. I know I need the crossbow type balances, but am unsure how to remove the cord from the frame. Your video shows simply unscrewing the top but I do not have a screw. I have a plastic elongat ... (cont.)

I am looking for this pivot bar to replace a broken one from our Oran windows. Oran has gone out of business. Harvey windows sells this exact same one but unfortunately only sells to Harvey customers. I found some letters from people on your website, that were looking for this same one and you ... (cont.)

B2573555 A2573556 C2573557 7246B-4 Looking for a replacement lock, latch for a sliding door. Here is the part # and a photo of the lock. The key lock and latch are broken.

I am looking for replacement tilt window latches for Castle double hung vinyl windows. Visually and dimensionally, they most resemble your 26-228/229 parts. However, mine are 1-11/32" wide, 2-3/32" hole center, and have a 3/16" diameter boss that sticks out the bottom about .100. Hole diameter is 3/ ... (cont.)

Need help to locate this parts.8590