Viewing all customer Discussions for:

Door & Window

Do you have a version of 70-195 that is a little longer? And a version of 70-009 with a white head?

I have peachtree windows and screens on the house. My screen use the small plastic latches similar to 70-208 and two metal posts on the top of the screen to hold the screen in place. Several of the metal posts are gone, are there specific replacement posts or would you just use a thick poprivet to ... (cont.)

I am working on these 17 year old Anderson windows and need to replace the roto mechanisms but could not locate them in any of the catalogs I have including Stybuc and Anderson. I am a window repair person who has been working in the business for 35 years but mainly for Pella and Pozzi. My experienc ... (cont.)

I have 2 of these Andersen sliding doors, circa 1983. The inside mechanism will not turn to lock the door. A friend removed the lock and it is frozen. Do you have replacement parts?

I am looking for a replacement for this window balance but do not see it on your website. The product has a number 8 stamped on the coil. I need this product for the left and right side of the window. Can you please let me know if you have this product or a product that I can used in place of this. ... (cont.)

hi there, is this corner fit with my broken parts? see the attached pictures thanks! width: 1" thickness: 0.5" chris

Do you have this glazing bead? It is for a Wenco window. Thanks

Which shoe goes with 26-175 Pivot Bar? Please send code. Thanks!

The part (looking at the front) measures 1/4" wide by 1 3/16" long. The slot/hole along the window edge is 2/16" wide by 1" long. There are no identifying numbers or markings. I have tan Custom Gard windows.

This door is white vinyl 43"x73". It uses the following parts: (1) Patio Door Handle Set, 3-15/16"; Product Code: 82-035 (exact) (2) Turning Lever; Product Code: 82-106 (maybe) (3) Outside Pull Handle, 3-15/16"; Product Code: 82-044 (exact) (4) Mortise Lock, Round Face, 3-11/16"; Product Code: ... (cont.)

I need a replacement eyelet for a skylight. Its a 5/16th diameter with 12 splines. Also, the set screw is situated lower on the eyelet....close to the opening. Do u sell those please ?

Hello - we have a customer with several windows with balances broken. These are double hung Semco windows - original to a 1998 house outside Columbus Ohio. We have two sizes - actual window 31*27 with a 29 inch balance and 31*31 with a 33 inch balance. On the 29 inch balance the stamp is r28TG. ... (cont.)

Hi, I'm looking for a wedgeless cam handle with 1 1/4 spacing. I'm looking for a pair in silver. Do you carry these, or have some alternative? Many thanks! Mike

We just moved into a house that has a Roto skylight with an inoperable opening mechanism. I have attached a picture of what it looks like right now. The only information that we have about it is what it says on the apparatus "Roto" and then "Truth 45013." On the brass-colored spoked wheel it has the ... (cont.)

Need help identifying the two balancer boxes we need replaced. Installed back in 1987. The number on the balance is E32 9#27 12 85. Last two numbers are hard to read, think it is 85. The emblem on them has AW inside a triangle? Other marks on the window is 11600-17.

Good afternoon, I have a broken patio handle for which I looking for a replacement. I have put some picture of the broken handle and would like to make sure that your model bellow is the right model Surface Mount Handle Set, 6-9/16" Product Code: 82-036 NOTE: What is your return policy, ... (cont.)

I ordered and received two Pella #81-098 patio door roller assemblies in April. They work beautifully and are of the highest quality. I replaced others that had been installed by a non-Pella dealer. I am in a dispute with this local window company who, I feel, cheated me and put in worn rolle ... (cont.)

Dear Swisco, I need to repair my windows and hope you can help. Here are the pictures of my window parts. Thank you. Eddy

U.s patent 4,083,264 Canadian pat. 1979 45012

I have an older (1980's) Pella sliding glass door that I will be replacing the rollers with your 81-249. The outer dimensions are the same as the old roller. The only difference I see is the nut for the height adjusting screw looks different but I do not see that as an issue. I also would ... (cont.)