Viewing all customer Discussions for:

Door & Window

Want to replace covers and handles of 1983-1 Marvin casement windows with folding handle and covers. Quantity 3 - 2 right hand and one left. Marvin states that Part 10814854 (ant. brass) handle, flip is correct part, but am quoted a price of $244 for each! Opening is 5" current cover 5- 1/8", cen ... (cont.)

I am redoing my windows in my 128 year old home. The glass I replaced in the bottom part of the window is substantially heavier and the weights won't hold the window up. I heard about these springs and want to know if they will work for a 22lb pane.

I am pretty sure I have a 795 Channel Balance, my problem is that it is stamped 34F, and I don't see that as an option. Can you also tell me if the mounting screw is included with the balance? Thank you!

My moulding is cracking out on several windows and I would like to replace it. moulding is 3/8 inch wide and strips could be cut from a roll if this is how it comes. lengths are 45 inches high and 23.25 inches right to left.

I have an Andersen Double Hung window from about 1987. The glass on both the upper & lower sash measures 24 3/8" wide and 15 7/8" high. The code on the glass corner reads G2-86. The G could be a C and the 8 could be a B. I have removed both sash balances and I see a code of 11600-17 on each balan ... (cont.)

Spring on latch does not hold latch engaged to keep door closed

I have Traco windows in my home and a part has broken. I wonder if you can help me find a replacement piece. I would like to order about a dozen (half RH/LH) if they are available. Attached is a picture of the piece I need to replace.

spring window balance with white plastic clip on one end and metal clip on the other. Spring length is +/- 23", 3/8" diameter.

I will be ordering a dual arm crank (Product Code 39-083). Can a "rookie" install the unit or should I look for a window installer to complete the job? Thank you.

I need help determining which Anderson window sach balance replacement part to order. The box is 6.25

This is a non folding handle...broken off after the hinge part...do you have replacement? If not, is there something that would work to replace the whole opening mechanism? Thank you.

I want to make sure that i am ordering the correct size. Large windows so im lookin for a hvy duty spring. S385-29 with a 2860 window weight, thx jims

I Have a Larson storm door customer # 462410715 with a single sweep. I Need a replacement and one of the screen frames broke so I need a replacement for that. Do you carry them?

This is a channel balance from an aluminum window, Alenco circa 1985. Has marking of 27 C. Measures 28 inches. I have identified the top piece as 19-002 but have not identified the bottom piece, or at least one that is close and might work. From looking at other customers post, possibly the S390 ... (cont.)

Hi, We have a '98 Pella door with the holes drilled, but no hardware installed. The mortise hole is 9" tall and 3" deep, and the backset is 1 7/8". The distance between the two bores is 3.5". Any thoughts on what hardware might fit in here?

I am needing to replace these tilt window latches as part of an inspection to sell our home. Attached are the pictures of the current latches. They measure 3" long x 3/4" wide x 5/16" tall. The only markings on these current pieces is (.075).

I need to replace my sash balance on a Anderson double hung the numbers on it are 519 also has 11600-17 and I believe date 4-89 could you tell me the replacement part number. I change both is their a difference between left and right numbers are the same

Need to find replacement rollers for a 40 year old screen door. I also need an outside door handle. The door handle has screws that are 2.5 inches apart.

Our screened enclosure was built in 1996. The door swings open to the inside, so I can't find anything compatible that won't hit the door frame on the outside. It was installed backwards. Thanks for your help.

Thanks for allowing for questions on your site. Your shipping charges are nice too. I want to purchase this flush bolt but I need another thing. Do you sell "catch" hardware that I could put on the door frame (top and bottom) to secure the bolt and hold the door firmly in place? Thanks and ... (cont.)