Viewing all customer Discussions for:

Door & Window

cannot find this brand of window to replace parts. Ever hear of REUTEN?? Was hoping for some direction, or maybe you have a universal part that could help?

I have ordered new rollers and a sliding glass door track cover from you which I should arrive at my home on 2/28/13. Several other sites recommend a small bead of adhesive on the old track when installing the new cover and one site suggests installing small screws at each end of the track cover. ... (cont.)

Hi, I have a 26" Caldwell window balance I need to replace. I got a little confused since it looks like there are two different series balances you offer that match my balance and then multiple stamp options as well that don't seem to match the stamps on my balance. Can you please help me out? See i ... (cont.)

I am trying to find the small white plastic ( 5/32" x 1/2" x 3/4") guide piece that is fastened to the frame that the locking slide bar moves up or down on activated by the locking lever that draws the window shut & locked. There are 4 of these guide pieces on the frame to keep the locking bar in pl ... (cont.)

Sir, I have 30 year old aluminium windows. I plan to restore them as cost effective alternative to replacement. I have already test polished one and the results are good. I now need to replace the beading shown in the pictures. 3 arched and 2 oblong windows. Is it possible you could send ... (cont.)

I work at Kannapolis Glass in Kannapolis North Carolina. We are looking for some white snap in vinyl to repair a customers door. I will attach a picture that my estimator drew, can you please see if you can help me. Please see the attached.

Hi, I am looking for a replacement part for a Certainteed Window. The following number was on the bottom of the window. I don't know if it will help as I couldn't find the number with this company anywhere online. The part goes on the side of the window allowing it to stay up and slide up and d ... (cont.)

I am interested in purchasing replacement white glazing for Alenco metal frame single hung windows installed on my house which was built in 1991. I have attached several pictures of the glazing with a ruler and one diagram of the approximate dimensions and shape. There is one part of the glazing ... (cont.)

I have tried before to remove doors w/o success but now I was able to take them off tracks. No real visible way to reach rollers on these aluminum Patio glass doors,. Problem is the door is dragging on the tracks. I have cleaned the tracks in the past and lubricated them with aluminum lubricant, b ... (cont.)

Take a look at 81-137, and 81-149. The 81-137 came up as the "30410" but I took a look at the patent and it looks like the 81-149. You will need to remove a roller to match up. If you have trouble identifying it by your sample, please send us detailed photos for us to research.

I have a single arm casement. The arm is 12 inches. What will work for,you replacements? Kevin

Top of the door pull is broken ( see att. pix). It looks like Capitol door pull you listed on your site. Can i get just the part or do I need the entire set. Stamped 8052103D. Please advise.

Tom,hopefully you can help me.Cuold you please send quote via of email. Thanks Tom Charles

I have been looking for replacement rollers for my pacesetter product screen door. I am needing a total of 4. Any help would be deeply appreciated.It has a number 70-1. Once again thank you

Hello I took this off of a 600 series tilt window. It was at the bottom of the window. Can you tell me what type of bracket this is?

FYI this is the opposite of the one I need homeowner threw out operator for left window. Please Help, THANK YOU!! Robert

Do you sell a T handle that fits the Keller Window Operator 39-060?

Hello, I just ordered part number 26-243 and 26-244. the measurements are exact and I believe these are the exact latches I need. My question is do they come with the internal spring or do I need to purchase them separate. I separate, what is the part number and can you ship them with my current ord ... (cont.)

I don't know if I need to take pictures yet, but I have a house that is 10 years old and has Kinco windows.....several of the little plastic tops on the sides that hold the balances down have popped out over the years and the balances have popped up, a common occurance..... My question is, do I h ... (cont.)

I ordered a couple balancers that I thought would be the right ones but they broke immediately. I am not sure what the windows weigh but here is a photo of the new broken balancers and the old broken balancer. I ordered S385-20 1930 thanks! Brian