Viewing all customer Discussions for:

Door & Window

Wright #07701-00 in bronze 6 ea

I need a replacement window channel balance. I think that's the name of the part. It is a 21" long metal channel with springs and line inside and plastic fittings on each end. One of the plastic things is broken. The # is 20 2 FN. Is this available, what is the price, and can I order one? The p ... (cont.)

Per attached photo, I'm looking for replacement keys for screens provided by Sierra Pacific Windows. The keys seem normal 3/4" but the tubing used for the frames has a profile that may be unusual. I've attempted to draw the interior sizing. Tube is 3/8" x 1/2" with a flange or tab width of 9/16" ... (cont.)

What is the correct replacement sash balance for D87 727 9-87? Are there left and right units or simply order multiple of the same replacement part? Working on two windows at this time. Thank you.

When the lock lever is moved to the full unlock position, the latch is retained and subsequent movement of the lever will not extend it. But when the lever is moved only far enough to unlock from the striker plate, then the lever will successfully complete the lock procedure by a full downward move ... (cont.)

I need a 1/2 inch channel replacement for my window 30 inches long but how do I know which series to use?

This is a good connector with spring attached. Do not know type of window. They are 20 to 22 tears old. Can find no markings on windows. Double hung and they swing in for cleaning.

I have a customer with a window that has a broken channel set. It is stamped 3230 but the plastic parts are completely missing or broken. The bottom pc is 15/16" from front to back, and side to side (tabs). The top pcs look broken and are 1-1/8"-1-3/32" wide at the tabs. Can you please tell me w ... (cont.)

white vinyl 3 1/4" lenght 1 1/4" width 1/2" lock 1 1/4 between screw holes number on latch 11148 Thank you

I am in need of some window parts and am hoping you can help me. I have TRACO Vinyl windows and am looking to replace the Constant Force Balances has broken on one of the window. picture included, The writing I can make out on the coil is #7.

the markings on the piece i took out the window is: 2990BD BSI34 1/2 or 9/16th measurement the foot length is 1 inch.

These numbers are on the sash balance from 1986 BP 112R 1086 11600-3 3355455

the depth of my extending part that the crank will screw on to is 3/4 long but the description says they are 3/8 inch - my windows are probably 25 years old - will this crank handle fit this old of a window

Paul, thank you for finding the discrepancies in my order. I'm not sure which balances and guides I need. Attached are photos of what I have. I hope this gives enough information to get the correct parts. I originally ordered series 200 but you thought I might need 303. Please email me with an ... (cont.)

I am looking to replace a spiral balance on 2 windows. The windows were custom made about 5 years ago, but the company is no longer in business. I was hoping you had the replacement. There is a stencil on the spiral balance that says "31-44 GD, Ultra-Lift", seen on attached picture "Closeup 4 ... (cont.)

Part # on balance reads, E28 9#27 7-85 which balance do i need to replace this with? And are both sides of the window the same part?

Length 2 1/8 inch Height. 1 5/8 Depth 5/8 Wheel diameter 1 1/2 Part #41781

Hello I wanna replace 8 channel balances they stamped 21 4 ep caldwell they ate 1/2 " wide can find them nowhere which ones could be use

I am looking to replace a window sash balance. Based on other posts I have seen, I tried to round up as much info as I could before posting. I believe that I need a 'S385-27 2660', but I wanted to check with the pros first. My window is 46 1/16" wide by 29 13/16" tall. It is a single hung non- ... (cont.)

Hello, i need to replace the tilt window latch right and left of my Patriot windows. Do you have any idea what would fit. ?