Viewing all customer Discussions for:

Door & Window

Hi, I have an interion sliding pella screen door that needs a new bottom plasitc guide. I will also be replacing the top roller (https://www.swisco.com/Pella-Sliding/pd/Patio-Sliding-Screen-Door-Replacement-Rollers/84-105?gad_source=1&gclid=Cj0KCQjwkN--BhDkARIsAD_mnIoGHQyC4SCHtm36ThA8JBtkuBmh ... (cont.)

Sorry for the bad photos...I dont want to take the window apart without replacement parts handy. Not sure if you can identify this pivot shoe from the picture but much appreciated if you can.

I have 2 windows @ 31 1/2" × 61 3/8" and 1 window @ 30 1/2" × 61 1/2" and need to replace both the left and right side tensioner assembly in each window, shown in the pictures.

About 1 3/8 x 1/2 x 28 Track spring window Attached string in screw at top of channel. Need bottom posts.

I need some PGT parts for some double hung windows. They are small white plastic parts that keep the windows from going from side to side. I have included 3 photos- one of the parts that are broken. One of the part correctly installed and the latch with the PGT logo. I would take up to 20 or may ... (cont.)

20 of your S795-27, 27G window balances with a hook as the top attachment

I need help identifying a replacement balance for my ( 2/12 ) UNIQUE 27-C-30. Measurements: length: 28 inches, Width: 1/2 inch, Depth: 1/2 inch This is for a tilt vinyl window. Attached is two pictures. Thanks,

Good afternoon, I am trying to track down the part pictured; the opening mechanism for my casement windows. The one pictured is in decent shape, although dirty, but most of the rest are super rusty and a few are rusted completly through. The windows were installed around 2008, when our condo built ... (cont.)

This is the back post for the rail on my drawer. The front bottom bracket has Delta Glide 100 on it. I haven't had any luck with this piece, or the cap of the rail that slides into it.

Please let me know if you can find this glazing bead in Clay or champagne. I need approximately 120' Thank you

Cranks are striped- don't turn. Silverline window in kitchen installed 17 years ago. Numbers on underside= Right crank 5053, Left crank 50T3.

Sash was dropped and need replacement parts for the items above.

Window Part # HA068310SSMI DIMENTIONS: 23 3/8 X 23 3/8 POSSIBLE DUEL ARM OPPERATOR

I have been trying to locate replacement rollers for my sliding glass door. I can not find anything that resemble the original rollers. The roller pictured is from my sliding glass patio door, there are two of these, the roller pictured appears to have all the little rollers in it, the other roller ... (cont.)

I have a window that the spring coil snapped after years of use. I have shopped images and it appears to be a blue Series 31 coil balance cartridge for tilt windows. I looked on your site but can't find the part. I have 9L stamped on the plastic. The closest part I can find is 01-31-1A-9-1 but I n ... (cont.)

Hi there, been trying to find my replacement glazing bead but I have not been able to find it. I've provided a picture and dimensions above for reference.i would like to have the exact replacement just to make installation easier but a acceptable and usable substitute may be what I need. thanks,Drew ... (cont.)

I need these partsTruth Hardware Right-Hand Casement Window Operator 13858Truth Window Hinge 31858.Truth Hardware Detach Clip 31865-B

I need on right side latch

i would like tu buy windows parts

Metal channel is 31.5 inches long. Stamp is 31 then a space and a 5 then B.S.I on its side then PN. Manufacturer is Milgard, made around 2005. I need 4.