Viewing all customer Discussions for:

Door & Window

Good morning! I have a house that we just bought that all of the balances have gone out. Most have been removed but I was able to find one that is in decent shape although not working as the clips were broken at the bottom. I can't find any markings on the window except for the MW on the lock. The h ... (cont.)

We need a crank and cover for small casement window in the bonus room above our garage. We’re selling the house and the inspector dinged us for it. It wasn't there when we purchased the house two years ago! Thanks!

Might be for a Velux window out of Home depot, rusted, no longer seems to be stainless steel. Any help appreciated!!

I need the S770-32 spring balance but my brake shoe is a little different. i have Danvid double hung windows from 2005

Need to find the handle replacement or the whole set

I'm looking for replacement window Channel Balances that are correct for the old ones that are labeled 28-3. The metal part of the channel balance is 29 inches long. I have attached pictures of the current ones. I also need Top Shash Giudes for windows which, I believe are model 18-029. Can you ... (cont.)

Hi, I wanted to verify the correct replacement casement operator for my Certainteed windows. Is the correct part 39-028E? I have included the jpeg AAMA sticker from the window. Thank you! Lou

Hi, I need one right and one left if we can get them thanks! Dave

I have a patio door with an unusual roller. The height is adjusted with an inserted aluminum piece that rolls over an angled shim. The shim (or wedge, or cam, or whatever it's called) has a flat side with Do you have a replacement for this wheel assembly?

22" long 1/2 inch wide #2140 3.SI

I have two windows that both need to be repaired (new balances needed). Attached are the relevant photos that I believe you need. If there is anything else needed to correctly match these up please let me know. Thanks,Corey

Our customer has 2011 Simonton windows 5500 series casement . They are looing for fold away handles in Bronze color.

Hi can some one identify part i need for this and also part that hold window in .

Need two window shoes and coil spring assemblies. Also four pivot pins. All for Simonton Stormbreaker 300vL window.

Number on mechanism: 40471

These are failing throughout my house. This one is 36 3/4 in long. There is a trademark in the close up

Hello, I am looking to replace a number of casement and awning window operators. I will need 6 left, 9 right casement operators and 11 awning operators. These came off of Hurd windows.

Please provide replacement kit to include everything with it for a easy and simple installation

I have ordered S380-37 channel balances and have replaced them in my windows. Sadly, I did not realize the balance tops are also broken, so the balances will not hook onto the window when I slide it down. The part that I need is the plastic top that screws into the side of the window that the balanc ... (cont.)

WINDOW LOCKS