Viewing all customer Discussions for:

Drawer & Cabinet

I believe I ordered the wrong hinges. I ordered 32-101 whereas I need 32-127. The only issue I have is the inset measurements on my existing hinges is appears to be 1/4" whereas yours says 3/8". The pat #s on the hinge are 3.391.420 and 3.908.228 and the numbers 7128 and the number 3. and they a ... (cont.)

Good DayI am looking for rear drawer glides. The one pictured is roughly 35 years old. There's a B stamped on it as well as 501. Any help would be appreciated.Thank You Ron

I need to find a replacement for 2 Mepla hinges, part # 677.229.53.00, and 2 base plates, part # 346.290.51.03.Thanks,Tom

I'm trying to find out if the Kenlin Rite Track glides are full-extension. If not, how much of a drawer is still inside the cabinet, when the drawer is pulled out to the stop? Thanks!

Need to get replacements for this parts what do you recommend patent # 32134 but all your comments said You cannot go by the patent number because it may referring to the whole Kenlin drawer track system and not the individual parts. Match up your actual hardware parts to the pictures on SWISCO's W ... (cont.)

Developer original drawer guide set, breaks easily with any weight in drawer. Item shown has a broken piece that plugs into back fiber board. If you do not have these, what will replace it. I have holes in the back fiber board that a new "holder" fits into. The longer piece slides onto the light wei ... (cont.)

Need new guides. Drawers just fall out when opened. Track is 15.5 inches long

Need the pull (1) pictured below. Thank you

Looking for at least 8 replacement Mepal mounting plate replacement parts 592.393.85.00, This mounting plate is used with Mepal 674.305.53.00 hinge.

looking for this drawer slide socket--over loaded the drawer and plastic bent.

Thomas I'll dresser drawer pull

The attached photo shows the part that I am looking for. It is attached at the back of the drawer and keeps it from falling out when opened. The furniture is from Century, but I do not have a model. etc. The 2nd photos shows the bedroom night stand that the piece broke off of. Any help would be app ... (cont.)

Hello I only have the one photo of a rear drawer guide that is broken and I am looking for a replacement. It is for a customer whose kids bedroom drawer. There is a number on it: H-1011. Your assistance is greatly appreciated. Regards Wayne

Rail width is 1.25" mount side is 2" rail extension side is 2.25"

Hey guys, I?m building a concealed medicine cabinet in a wall, the wall and cabinet door will be getting tiled so the result is a thick (approx 1-1/8?) and heavy (may be 25-30lb) inset door. Will these hinges work? I know I will need 5-6 hinges to support the weight but will a door that thick clear ... (cont.)

R-40-28 What is your replacement part? 32-118 is what I think it is. How do I get the correct part or piece.

I need a replacement for the Ronthor Reiss Real Drawer Glide R-40-28 that supports a drawer that weighs about 20 pounds. The plastic "C" shaped pieces on the original glide broke. Do you happen to carry this?Ronald

Need 2, have wooden center

I have several drawers that the track is loose in the back because the rear plastic bracket has broken loose of the rail. The side mount slide has "UNIGRASS 6600" stamped on it. Any idea which rear adapter brackets might work? Thanks Art