Viewing all customer Discussions for:

Other

I bought American Craftsman windows series 8500 from Home Depot in 2006. The spring broke, I was able to remove the remainder of the spring from the case. The case has a 6 stamped on the side. The spring has 6DB stamped near the end. The case is 2 and 7/16 inches long, 1 and 1/4 inches wide and 9/ ... (cont.)

Hello, I accidently ordered part # 15-192 Shoes to replace the shoe in a simonton window' The size of the shoe is almost identical if that helps. After vwatching your video it looks like i need to order a different shoe pivot bar and possibly a new coil balance and coil supports as well? Let me kn ... (cont.)

Hi Looking to replace old seal for bottom sash of Alside window Model 0201 Excalibur dbl hung

There is no brand tag on these windows. The factory put the spiral balances into the center slot, which is the weakest option. That pinched of the angle slots down, so I guess we'll change out the shoes. This looked exactly like a Great Lakes s shoe from my stock, but I don't find this one in your ... (cont.)

I'm working on some wood double hung from the 60s. These springs are broken on a couple. I took this one off to show. Can you help. I measure 23 1/4" X 1/2". Thanks

I need to replace a window casement part for a window that the crank fits into it. I cannot find any manufacturing information on the window, but I took photos of the part I need. The part is 3" long with the two hooks for the crank piece to fit in in.

This weather stripping is coming out the the Jeld-Wen windows at my home. I am looking for replacement stripping for the windows. The seriel number engraved in the windows is G1407123214706 and G1407123214708. These are crank out windows.

I'm looking for four sash locks for my vinyl Viking windows. The sash lock is 2 ¾" by about 1 ¼". I have attached a photo. Please note that the "receiver" is very thin. (I purchased a replacement part on Amazon, but the "receiver" was too thick, which prevented the window from opening. ... (cont.)

Hello - hoping you can help me find the correct replacement channel balance. It is from an Atrium brand window, non-tilt. Balance is 27" long, 1/2" wide. Thanks a lot.

Hello I need help picking out a window balancer. I have ordered three 2 from here and one from another place none have fit. The markings on the broken piece is +DB27HD.

I purchased the S140-3. When I lower the window it interferes with the tilt window latch. The old spring holder was shaped with room for the latch to pass without interference. The metal coil is 3/8" wide. Thanks for any help.

Looking to order 2 of the these as soon as you identify the right one. Thanks

replacement like above, no mfg name on operator (edge of show that fits in track has broken away)

Need replacement roller for 45 yr old Peachtree door. Bearing is shot and roller gets jammed.Are these photos adequate to identify the replacement Swisco part. Thank you for your assistance. Buster. I will replace two rollers.

Hello,For the missing window crank, do you have a suggestion of what I could use to replace this? I would like to have it fold down. For some reason, this particular window has two different parts for cranks. On the left side, the 39-107FK Swiss product works. However, on the same window, we have a ... (cont.)

24 5/8 tube length . Riveted to bracket that mounts to bottom of window . Wood double hung

Need to replace handles and lock for this door. Can you help with identification?

5/8" channel, 34" channel

I have some American Weather-Seal double hung windows that have gaps on the sides. You can feel a draft coming through and in some instances, you can see sunlight. Do you have replacement jamb liners? The windows have tilting channel balances. Do you have a window rebuild kit? Thanks, ed ... (cont.)

Good day, I was on the internet looking for Pivot Bars and came across your website. I am in need of Pivot Bars for our sliding windows. Attached is a photo of what I am looking for. Can you help? Thank you for your time.