Viewing all customer Discussions for:

Other

The overall length is 18 inches. The only markings are 17 2 JW CMC 11

Hello, I am unsure which part this would match to. I think 390 but not real confident as it is a little different. It says my windows were mfr by Gienow Building products. Length of metal part is 27". Please let me know if you need any more details or pics. Thanks!

The cranker is 31/2 " across in width and 3" in length vertically from the top of the round part. long from end to end and the hole that is in the middle is about 1/2 inches. The total length of the thingy with the round hole is about 4 1/2 inches. Please let me know of you have the correct replac ... (cont.)

Good morning! Bought a house and they didn't finish the installation of the crank handle and cover for our casement windows in our primary bedroom that is sub level. I have searched the windows meticulously for a sign of the brand, or any type of identification numbers and only found the AAMA certi ... (cont.)

I need 5 of therse window cranks IH CO 790.

Hi Could you ID these parts? Wondering if any available or instock. Thank you.

I need a replacement handle. The original one was made by DNS Ind. There are no other identifiers on product. It is a surface mount with handles on outside and inside front frame of sliding door. The manual "on/off" (green/red) switch is broken and therefore the latch and keeper are not working ... (cont.)

Hi there, 25 years ago I built this house. I got a deal on some windows at the local lumber yard so I bought them. In all these years I have never used them because they wouldn't open, wouldn't close . Horribly designed M&W. Recently I forced them all open and it really moved the air through my hous ... (cont.)

Can't identify these groups of parts and needs replacements.

Hi, I am looking to replace the latch and shoe for my window. I only know it's 27 inches and found the marking on the 27C NL BS(I). The block is nested in the side corner with the metal square on the end (see picture). I do know the maker of the windows the label is worn. I have attached 3 pictu ... (cont.)

Dear Sir/Madam, Can you please help me find this part? It's a sash cam that mounts to the side towards the top of the window. The measurement is 5/8" width, 1-3/4" length overall. The top box is 7/16"W x 3/8"L x 3/8"H. It has two holes on the body. Thank you so much!

Hello! No identifying marking on windows but many need replacements Sash is metal 3 inches long, about 2 & 5/16 hole to hole. Tilt lock is plastic , 3 inches 3/16 long, 2 3/16 hole to hole .

Large arm: 30470LH (9 1/2") Small arm: 20810 (4 3/8") and L30841 (3 1/2") Plate: 40372, Yoke: 30830 The small arm has an upward offset.

Good evening. I am trying to identify these two clips. These clips have a small notch on the bottom that, when the window is closed, hold the window secure in place. The second pic is the same but it is at the bottom of the window attached to the bar that runs across the bottom edge. I have sever ... (cont.)

Looking for sliding glass door rollers

Is this the model number 7116-5? Is there a Swisco version of this part?

Hi: I have a single hung CertainTeed Vinyl window. The left side counterbalance spring seems to have broken so the window won't stay up in intermediate positions. I took it off and you can see the one spring is attached to the shoe but the other spring seems to have broken where it would attach t ... (cont.)

Hello, I have these two windows and the assembly cover on the left window has broken and the worm gear can be removed. On the right hand gear assembly the cover is cracked and there is some play in the handle when opening/closing. 7191-33B is stamped on the inside of the cover. I think I need ne ... (cont.)

House built in 2003. Might as well replace both balances. Plastic "ear" broke off on right-side balance. BSI 2630. Please advise of price for the balances and shipping to 80020. Thanks! Ed

There are two of these that are 47 1/2". He ordered Larson doors at the same time, but can't remember if this one is a Larson 5/8" from top to bottom and 1/4" across. T shape. Thanks so much