Viewing all customer Discussions for:

Other

weatherstripping for PGT 750 series French doors

I'm needing to replace this piece on the opposite side. At some point someone tried to replace with a part that doesn't hold the track properly on the bottom. And it also broke from the weight. These are large drawers. Ignore the zip ties. Apparently they were holding it together since the last piec ... (cont.)

I need your help to identify what replacement operator will be suitable for the awning window. I also need a new white crank and crank cover. And if you have a lubricating spray I would like to order that as well. Thanks in advance for your help!!

Looking to replace latch. Insert won't spring out to secure door. Part has 0248/3 on it.

Hello! I have two busted 14" channel balancers, neither of which still has all the guts inside. However, I have pieces of a block and fall and a spring. The channel has "14B BSI" and either "01" or "04." It's a really poor stamp. Thank you!

Looking for replacement parts. The current parts are constantly breaking. I am looking for replacement parts. Please advise on part # and costs

need replacement rollers for sliding patio door, comparing photos looks like the one I need is P/N 81-011, but I'll send photos so the experts at Swisco can make sure I'm ordering the correct rollers.Thanks,Pat

Piece that slides into track and catches the window balance bar

Need to find part and how to replace

I need to order a right and left channel balance rod for one window. I have had my son help remove the channel rods both right and left and need to order one of each to replace them. I am not techie and will need to wait until my son gets home to help me transfer the pictures I took of the left c ... (cont.)

Looking for replacement standard weather-strip and door seal for our Jeld-Wen exterior door,.

There are no markings that I could find. the attachment screws are 3x15/16 apart. The base is 9x1/2 inches long but I don't think that matters. The door is 1x1/2 inches thick. Thanks

Hi guys. I need one if these Truth cranks. Let me know so I can order. Thanks, Jay.

I know it's Truth hardware, but the numbers are mostly rusted out. It looks like 307X4B or something like that. The "X" is for a number that is completely unclear. The bottom slide rail is 10" wide. The metal piece attached to the bottom of the sash is 8" wide approximately. We need all of that ... (cont.)

I have a window that needs all four coil balances replaced. The label in the window says MI Windows & Doors 26252044.3 BMDH3 That is the only markings I am finding. The metal coil itself appears to maybe have a "9" stamped in it?

Hi,Our 11-years-old Silverline Vinyl GBG windows have screen frames with "pull-down/locking tabs" corner keys on the top. See picture of top-right position.The frames are 5/16th X 3/4 inch.I found two different parts on your catalog, but not sure which one I should order.Which part should I order?T ... (cont.)

Tabs broke where screws attach that bind and hold unit in place

I cant find one like this with two holes...I see one with one hole. can you help me identify it?

I am looking for a replacement door latch for my cole Sewell storm door.

Hi, this is a pivot pin that was bent and broken on a window sash. It is approximately .25" wide and it came out of a window that had a "Trinity" label on it from 2004 I believe. Both pins (each side) were bent so that it wont fit into the pivot shoe on either edge of the window. The other pictures ... (cont.)